Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

A-140 gb! CLOSED.






thanks, i have some good news, they arrived today :) all 4 are working fine :)

just currious, what are most of you using for the driver? microflexi or microboost?
 
Depend your needs,

microboost--> max 1A current
flexdrive --> max 1.5A current but mine is max out on 1.3A
 
HTID said:
thanks, i have some good news, they arrived today :) all 4 are working fine :)

just currious, what are most of you using for the driver? microflexi or microboost?
Click to expand...

Good deal, this was a good group buy thanks to 11xpntb11x11 for all the hard work!:wave:
 
HTID said:
thanks, i have some good news, they arrived today :) all 4 are working fine :)

just currious, what are most of you using for the driver? microflexi or microboost?
Click to expand...

glad they arrived, sorry for the long delay. but im glad they are all working. and i finally got my build done with the diode i got from a buddy laying around. have it in a LP2 host from jayrobs tutorials and i made my own custom heatsink, burns like it is its job id say. i have the driver set at 1.2 amps not sure the mW as i dont have a meter
 
ok, and who can tell me the main difference between the 2 drivers? which is better and why?
 
The Microflex is a Buck/boost driver and can go up to 1.5A. The Microboost is just a boost driver only and can only go up to 1A, that's all I know about them :)
 
You can go up to 1200ma on the microboost IIRC with an additional solder bridge. There is a thread around here somewhere explaining this.
 
Mines in a Lp2 also. I used the microflex set at around 1490mah. And it runs really good
 
Hi you all,

Glad you all recieved your diode's.

Unfortunately I haven't.

I wrote llxpntblx a message few weeks ago, but he doesn't respond.

Any ideas what to do?

Tnx.
 
You must log in or register to reply here.


Back
Top