Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

7 W 450 Sinner V1 FS! lowered price!!

^^^ Dont worry, if anyone has any concerns or questions they are free to PM me! Thanks :beer:
 





7W powered by two 16340s? is it possible to exceed the duty cycle before the cells drain? lol. just poking fun, it looks like a good unit, I'm sure it will sell

the buyer may want a few pairs of cells though
 
Last edited:
Shakenawake said:
7W powered by two 16340s? is it possible to exceed the duty cycle before the cells drain? lol. just poking fun, it looks like a good unit, I'm sure it will sell

the buyer may want a few pairs of cells though
Click to expand...
On my 44 build it would run for about 20 minutes on a 2200 mah battery but that was 12.6v. At a mere 7.4 or so volts and 700mah I would have to guess a 4 minute or less runtime.
 
Yeah I don't run my lasers for 20 mins at a time ;) Dont forget this is an efficient Buck driver. The current draw at 4.5 A will be around 3 A and this will give you around 15 mins on time with a couple of 700 mAh batteries. Observing the duty cycle you'll get around 40 - 45 mins before you'll need to change the batteries...Don't forget too that a boost driver with eg an 18650 will draw a lot more current and although the capacity will be greater this will be off set by the higher draw. Quite frankly Im wondering why this was even brought up, this is an issue for the majority of battery powered lasers...:thinking:
 
Last edited:
For anyone interested in purchasing a laser or anything from Grainde...
He is an experienced seller and knows just about everything about lasers.
He sold me some Krytons. He has always been professional, helpful, and prompt.

The Sinner host based lasers he is selling are top notch. Sinner is no longer making them so if you want a nice laser...now is the time to get one.
 
Sold thanks for Looking! I should have a couple more ready by the weekend :beer:
 
  • Like
Reactions: GSS
Be so kind to let me know what lasers you have for sale and their costs.
thanks jensen
 
I made 3 over the weekend and will hopefully have a couple more finished tonight. Ill send you PM with info this evening.:beer:
 
Ok I have finished 3 x Envys, 2 x V1s and 1 x Phobos! These are all with NUBM44 diodes and Black Buck 6 drivers at 4.5 A! I still have to meter them, so Ill start a new FS thread when I have the results. Ill also post pics of the builds to show how the first 3 were made - It'll serve as a sort of combined build info and FS thread. :) :beer:
 
Last edited:
Here is a pic of two polished Envys and a Phobos :)

IMG_0939_zpspe2xfmo2.jpg
 
  • Like
Reactions: GSS
How much are the Envies. I was going to ask with a PM but I'm sure others want to know also.
 
You must log in or register to reply here.


Back
Top