Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

12x BR DIODES

My friends it is with great sadness that I must inform you of the death of the Chrome mini at 830mW. It was this afternoon while I was cleaning the window and lens. As I was using the laser I noticed the laser was getting hot. It doesn't usually get hot. It seemed to even stay hot after that laser was shut off. I went to turn it on once more to see if I had done a good job with the lens cleaning and all that remained was a small dim light. May she rest in pieces...until the next victim arrives from newegg.

Do you have an estimate of total hours "on"?

Peace,
dave
 





I do not know the total hours on. I will tell you that it has been my daily carry around laser ever since it has been built and I have used it a lot. I am sorry I do not have any quantitative estimate as to the total on time.
 
I do not know the total hours on. I will tell you that it has been my daily carry around laser ever since it has been built and I have used it a lot. I am sorry I do not have any quantitative estimate as to the total on time.

Fair enough. Thanks

Peace,
dave
 
has any one here ever thought to sell their led lasers?
i had a red laser blow on me but it still produced a spot but it was about 1/5 what it was but hey maybe good for someone who wants an extremely low powered laser or just something to test and see how to do things.
 
"All 12x Owners" datasheet updated with the last info relevant to yobresal 2! :cryyy:
 
My friends it is with great sadness that I must inform you of the death of the Chrome mini at 830mW. ... May she rest in pieces...

*removes cap, lowers head and observes a moment of silence*


...but hey maybe good for someone who wants an extremely low powered laser...

*removes cap, swats kiyoukan with it, places cap back on head*
;)
 
Last edited:
*removes cap, lowers head and observes a moment of silence*




*removes cap, swats kiyoukan with it, places cap back on head*
;)

How did you remove your cap twice? you took it off already!
And what at least if it died instead of trashing it maybe make 5-10$.
You could at least then brag you have a 12x laser.
hehehe, just not a living one... but you would have one.
 
How did you remove your cap twice? you took it off already!
And what at least if it died instead of trashing it maybe make 5-10$.
You could at least then brag you have a 12x laser.
hehehe, just not a living one... but you would have one.

For Sale: Zombie 12X -- putting out 27mW at 600mA. Good as a lecture pointer (if you don't mind replacing the batteries every couple of days or it heating up in your hand) :whistle:

j/k

Peace,
dave
 
Got one to add :D

img0332y.jpg


Diode out of PX-B940SA, Jayrob Pocket Mini Host, Micro Boost Drive v1 set to 460mA, UltraFire 3.7V 1000mAh CR123A and 405-G-1 putting out 668mW :)

Edit: Just saw this, look at the beam when its on the red wall and then on the white one :)
 
Last edited:
"All 12x Owners" datasheet has been updated with the entrance of pHeneX 2 and the last info relevant to daguin!
 
Last edited:
My friends it is with great sadness that I must inform you of the death of the Chrome mini at 830mW. It was this afternoon while I was cleaning the window and lens. As I was using the laser I noticed the laser was getting hot. It doesn't usually get hot. It seemed to even stay hot after that laser was shut off. I went to turn it on once more to see if I had done a good job with the lens cleaning and all that remained was a small dim light. May she rest in pieces...until the next victim arrives from newegg.

The next victim has arrived!!! It is now in the Chrome mini. IT LIVES!!!! I am very happy to announce the Chrome mini is alive and well once again. The output is now 840mW with the same current. (different 405-G-1 thought)
 
... IT LIVES!!!! ... output is now 840mW with the same current. (different 405-G-1 thought)
:wave:
You have a thing for that specific current setting, huh... well, you know what they say, no guts, no glory... :D

Different 405-G-1...? What happened to the original, did it disintegrate when your first 12x had its meltdown? ... :crackup:
 
I used the old one in my 12X pen and bought a new one from Jayrob. Yeah I feel that 600mA is a good current to give the laser a nice long life. I'm not a fan of over driving my lasers.

J/k
 
I used the old one in my 12X pen and bought a new one from Jayrob. Yeah I feel that 600mA is a good current to give the laser a nice long life. I'm not a fan of over driving my lasers.

J/k


Just making sure that the less experienced members notice the J/K at the end. Those are not his initials ;)

Peace,
dave
 
"All 12x Owners" datasheet has been updated with the entrance of yobresal 3! :beer:
 





Back
Top