Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

1 watt 808nm laser build for 75 bucks.

T

TuMadre

0
Joined
Jul 8, 2009
Messages
15
Points
0
This is my first laser, and I'd thought I'd start big. I'm looking at the diode online for 40 dollars
1W High Power IR Burning Laser Pump Diode 808nm 1 Watt - eBay (item 250457847504 end time Jul-13-09 16:40:34 PDT)

a laser module for 5 dollars
650nm 5mW laser module.3.2V to with lens 650 nm OEM - eBay (item 360168072204 end time Jul-12-09 18:51:14 PDT)

A flex drive v4 for 23 dollars
http://hacylon.case.edu/ebay/laser_diode/Micro_FlexDrive.php

And the other six dollars being shipping.
The housing I have already, its an mini maglite I have lying around here somewhere...
Anything I should beware of/know first? (I think I know how to adjust the flex drive, and have a multimeter.)
 





the module is too small.. thats a 5.6mm module and you need a 9mm module for the 9mm diode you ordered

everything else seems ok to me


hah nice name.. tu madre = ur mom
 
Last edited:
Is there any place to get a cheaper 9mm one? I might want to do this build more than once, and keeping the total as close to 100 dollars would be great. (preferably less)
 
Do not use a mini maglite for a host!! They have absolutely no room for a driver. Buy an MDXL flashlight off of dealextreme.com for <$6.

Also, you will need a heatsink. A 1W diode will generate a LOT of heat, and will cause damage. You can make a heatsink out a washers glued together, and the module glued inside.
 
randomlugia said:
Do not use a mini maglite for a host!! They have absolutely no room for a driver. Buy an MDXL flashlight off of dealextreme.com for <$6.

Also, you will need a heatsink. A 1W diode will generate a LOT of heat, and will cause damage. You can make a heatsink out a washers glued together, and the module glued inside.
Click to expand...

I could always use aerogel. I have some lying around the house (Its fine grain) And pouring it into the compartment I use for the diode and driver. I'd be cold as a witch's teat in there.
 
Uhh, aerogel is an insulator... One of the best insulators known to man... For heatsinking, you'll need something that conducts heat well, not something insulates it. Use diamonds if you want to be all extreme like that.
 
I know people like this, they just want to make some kind of deathray. and this kid most of all. Aerogel? Really? are you retarded. jesus motherloving christ woman.
 
ErdamUt said:
I know people like this, they just want to make some kind of deathray. and this kid most of all. Aerogel? Really? are you retarded. jesus motherloving christ woman.
Click to expand...

Come now, we *all* want to build some sort of deathray. Name calling is unnecessary.
 
Hey guiz, I just finished buying everything. I got the diode for 21.50 (fuck yeah ebay)
the host for 6.73
The module for 6.95
And the driver for $30
Final cost (excluding a couple cents here and there for washers and solder)
$65.18.
 
You must log in or register to reply here.





Back
Top