Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

FS/FT: Blu-ray, Red set - Copper Heatsinks

Joined
Mar 25, 2008
Messages
1,007
Points
38
I have these two lasers which I'd be willing to sell or trade (preferably as a set). You can swap the back two pieces as you wish, making it either two-tone, or just one color (as seen in pic of flashlights). The one with the red top is a red laser, the one with the black top a blu-ray laser. They each have a copper/aluminum heatsink (mostly copper, a gap in the back filled TIGHTLY with aluminum foil). One is a LPC running at 410mA w/ a rkcstr driver (should be mid-200mWs? I forget), the other is a PHR running at 125mA with a rkcstr driver (should be 100-110mW). Both can obviously burn electrical tape, light a match, pop balloons, etc.

IMG_0454.jpg


IMG_0450.jpg


IMG_0453.jpg


IMG_0455.jpg


I'm looking at all offers, but I'm in no rush to sell. PM me or post if interested or if you have any questions.

I'll also throw in some diffraction grating glasses, a uranium vaseline marble, and a blu-ray sticker :)
 





Joined
Mar 25, 2008
Messages
1,007
Points
38
They're sticking out because they're using rkcstr drivers, not flexdrives. I would think the heatsinking is still fine though, but I guess I'm no expert on thermodynamics yet.
 
Joined
Sep 4, 2009
Messages
581
Points
0
$200 is over priced.

A really good BR build in a beautiful host cost me $85 BUILT AND SHIPPED.

These 2 hosts are cheap, with cheap insides.. And your trying to make a fortune on them when they are in fact not worth half the wanted price.

Your probably best off keeping them and enjoying them
 

Gata

0
Joined
Dec 26, 2008
Messages
417
Points
0
Could you find any ruder way to tell someone that they are selling something for more then it's worth TJ? Jesus Christ, for a 42 year old guy you act like a frikkin kid.
 
Joined
Mar 25, 2008
Messages
1,007
Points
38
alright, w/e people. they're not cheap insides, w/e. I have 50+ lasers i've built and collected. I don't need any input. I was in no rush to sell them, just thought some people might want them since I have enough, but if everyone thinks they're worth like $50 or $60, ohh well i'll keep them
 
Joined
Mar 25, 2008
Messages
1,007
Points
38
Could you find any ruder way to tell someone that they are selling something for more then it's worth TJ? Jesus Christ, for a 42 year old guy you act like a frikkin kid.

Thank you Gata. I said the same thing in a neg. rep for him lol. He neg. repped me for "spamming". I've been around a year longer than him and have less than a 1/3 of his posts. He's 42 and acts more immature than me, and i'm 16.

Edit: actually, almost 1/5 of his posts...
 
Joined
Mar 25, 2008
Messages
1,007
Points
38
I know it's not "crappy" either^^. Sorry for bursting out slightly, I was just getting annoyed lol. I know a little about thermodynamics, but I'm no expert. Both heatsinks are fine. The first is fine as long as you don't run it for too long. I've built plenty of lasers, and I can say, some had much worse heatsinks than others, some used steel, but none of my diodes have ever burnt out.
 
Joined
Jan 2, 2009
Messages
11,800
Points
0
Could you find any ruder way to tell someone that they are selling something for more then it's worth TJ? Jesus Christ, for a 42 year old guy you act like a frikkin kid.

There are reasons behind this..so mind your own business bro.

Thank you Gata. I said the same thing in a neg. rep for him lol. He neg. repped me for "spamming". I've been around a year longer than him and have less than a 1/3 of his posts. He's 42 and acts more immature than me, and i'm 16.

Edit: actually, almost 1/5 of his posts...

I negative you??? Were is that? So you are a liar too. Typical 16 year old. Thanks for the Rep. I will continue to keep my eye out for more of your bull$hit.
 
Joined
Mar 25, 2008
Messages
1,007
Points
38
I don't know if you got privileges or something, but don't give me that BS, i'm not retarded, yesterday/two days ago there was a neg. rep on my profile from you for "spamming" it's not there anymore but w/e. I don't know if I can, or would want to remove mine on yours...

Edit: I'm surprised I went through the trouble to do this, but I just hate being called a liar, especially from a 42 year old child... Here's a picture:

negrep.jpg
[/IMG]
 
Last edited:
Joined
Jan 2, 2009
Messages
11,800
Points
0
eh..you can PhotoShop anything. I don't see and red marks on your profile.

And I have no "privileges" LOL Was it there yesterday or 2 days ago? Make up your mind. Keep up the act pal...
 
Joined
Sep 4, 2009
Messages
581
Points
0
I've been photoshopping for over 4 years now.

Unless he's really good at perfect measurments and colours/icons - He's not lying.
 




Top