Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



FS/FT: Blu-ray, Red set - Copper Heatsinks

Alexizupinhea

New member
Joined
Mar 25, 2008
Messages
1,008
Points
0
I have these two lasers which I'd be willing to sell or trade (preferably as a set). You can swap the back two pieces as you wish, making it either two-tone, or just one color (as seen in pic of flashlights). The one with the red top is a red laser, the one with the black top a blu-ray laser. They each have a copper/aluminum heatsink (mostly copper, a gap in the back filled TIGHTLY with aluminum foil). One is a LPC running at 410mA w/ a rkcstr driver (should be mid-200mWs? I forget), the other is a PHR running at 125mA with a rkcstr driver (should be 100-110mW). Both can obviously burn electrical tape, light a match, pop balloons, etc.









I'm looking at all offers, but I'm in no rush to sell. PM me or post if interested or if you have any questions.

I'll also throw in some diffraction grating glasses, a uranium vaseline marble, and a blu-ray sticker :)
 

Elektrotechniker

Well-known member
Joined
Nov 10, 2008
Messages
4,260
Points
63
why is the aixiz module sticking out so much?
yeah. I was wondering the same thing. Alex, I think the heatsink is useless in these builds as most of the body of the aixiz modules is not covered by the heatsink... Am I right?
 

Alexizupinhea

New member
Joined
Mar 25, 2008
Messages
1,008
Points
0
They're sticking out because they're using rkcstr drivers, not flexdrives. I would think the heatsinking is still fine though, but I guess I'm no expert on thermodynamics yet.
 

Alexizupinhea

New member
Joined
Mar 25, 2008
Messages
1,008
Points
0
This heatsink wasn't the one in that tutorial. It's not a thin piece of sh*t. Hope your having fun hijacking my threads, god what a faggot.
 

Tech_Junkie

Banned
Joined
Jan 2, 2009
Messages
11,871
Points
0
The module is around $25 + host $3 + Aluminum foil $0.02 = $28.02. So you are saying the heat sink is $71.98??? LOL

I'd rather be a faggot than a scam artist. Good luck with your sale sweetheart.
 

blue lasers

New member
Joined
Jul 1, 2009
Messages
590
Points
0
The module is around $25 + host $3 + Aluminum foil $0.02 = $28.02. So you are saying the heat sink is $71.98??? LOL

I'd rather be a faggot than a scam artist. Good luck with your sale sweetheart.
you can get the module for 18 and free aluminium foil so the heatsink is 79$LOL
 
Last edited:

tommii89

New member
Joined
Sep 4, 2009
Messages
581
Points
0
$200 is over priced.

A really good BR build in a beautiful host cost me $85 BUILT AND SHIPPED.

These 2 hosts are cheap, with cheap insides.. And your trying to make a fortune on them when they are in fact not worth half the wanted price.

Your probably best off keeping them and enjoying them
 

Gata

New member
Joined
Dec 26, 2008
Messages
417
Points
0
Could you find any ruder way to tell someone that they are selling something for more then it's worth TJ? Jesus Christ, for a 42 year old guy you act like a frikkin kid.
 

Alexizupinhea

New member
Joined
Mar 25, 2008
Messages
1,008
Points
0
alright, w/e people. they're not cheap insides, w/e. I have 50+ lasers i've built and collected. I don't need any input. I was in no rush to sell them, just thought some people might want them since I have enough, but if everyone thinks they're worth like $50 or $60, ohh well i'll keep them
 

Alexizupinhea

New member
Joined
Mar 25, 2008
Messages
1,008
Points
0
Could you find any ruder way to tell someone that they are selling something for more then it's worth TJ? Jesus Christ, for a 42 year old guy you act like a frikkin kid.
Thank you Gata. I said the same thing in a neg. rep for him lol. He neg. repped me for "spamming". I've been around a year longer than him and have less than a 1/3 of his posts. He's 42 and acts more immature than me, and i'm 16.

Edit: actually, almost 1/5 of his posts...
 

Prototype

New member
Joined
Jun 19, 2009
Messages
2,712
Points
0
This heatsink wasn't the one in that tutorial. It's not a thin piece of sh*t. Hope your having fun hijacking my threads, god what a faggot.
Sorry for the threadjack, but the heatsink in that one isn't a 'thin piece of sh*t' It's good enough for a GGW. Plus, the member who used it knows more about lasers than most of us combined, so don't criticize it just because you don't think it's good. Just my $0.02.
 

Alexizupinhea

New member
Joined
Mar 25, 2008
Messages
1,008
Points
0
I know it's not "crappy" either^^. Sorry for bursting out slightly, I was just getting annoyed lol. I know a little about thermodynamics, but I'm no expert. Both heatsinks are fine. The first is fine as long as you don't run it for too long. I've built plenty of lasers, and I can say, some had much worse heatsinks than others, some used steel, but none of my diodes have ever burnt out.
 




Top