Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

New Hosts In Construction

Joined
Jan 29, 2014
Messages
12,031
Points
113
i will give you a call, please pm me contact info or your web site, if you have one.
 





Joined
Feb 1, 2017
Messages
670
Points
0
i will give you a call, please pm me contact info or your web site, if you have one.


I do not have a website! I do not need !
If you really have something to ask, do it here! otherwise good day!
It's the second time you do the same questions!​
 
Joined
Jan 29, 2014
Messages
12,031
Points
113
won't allow contact outside the forum, how am i to pay you or even confirm you are legit?
 
Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi Rich,
I got half an hour to make sure I'm hosting the module!
Anyway, it's a 3cm external module where I put the 12x45mm blue / violet module (I think) 1.5W with the already connected driver, the lens is the classic "acrylic" and "black" soft plastic with the black black spring!

What do you think of Riccà of this first attempt?

Hi,
At 1.5W i would use a metal barrel lens, Acrylic lens no go.

Rich:)
 
Joined
Jul 10, 2015
Messages
9,799
Points
113
I do not have a website! I do not need !
If you really have something to ask, do it here! otherwise good day!
It's the second time you do the same questions!​

WRONG, it should be: It's the second time you ask the same questions!

Just like you used the word ask in the sentence RIGHT ABOVE THIS ONE !

Who do you think you are fooling?
 
Last edited:

diachi

0
Joined
Feb 22, 2008
Messages
9,700
Points
113
3D, looks like the diode module isn't inserted all of the way into the heatsink to me. That's not optimal for cooling as it results in a reduction in surface contact between the diode module and the heatsink. Something to keep in mind. Edit: Nice looking build otherwise! :)

Alaskan, can you stop derailing other people's threads with this stuff. Not saying I disagree with you, but doing the same as he's doing doesn't help anything. Take it to PMs or a thread more suited to it. :)

Edit: Updated to be a little less mean to Alaskan.
 
Last edited:
Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi 3D,
Yes as Diachi said make sure the 12mm module holding the diode is flush and even with the top the heat sink for ultimate heat dispersion into the main sink. Your diode will thank you for it in the long run. Nice build..well done on to the next one..

Rich:)
 
Joined
Feb 1, 2017
Messages
670
Points
0
3D, looks like the diode module isn't inserted all of the way into the heatsink to me. That's not optimal for cooling as it results in a reduction in surface contact between the diode module and the heatsink. Something to keep in mind. Edit: Nice looking build otherwise! :)

Alaskan, can you stop derailing other people's threads with this stuff. Not saying I disagree, just that you can't complain about 3D derailing threads with random unrelated questions when you're derailing his threads with this stuff.


Thanks for the advice .... it's just that was not something you wanted! I had widened the heatsink hole with a 12mm pitcher, then I plugged the complete module and arrived at some point did not go any more! then I took the Singer's oil and put it in a little bit in the heat sink, then it came in handy but not all!
However, certainly the next laser will be better! also because I'm building a small drill bit at 3 Jaws!

Alaskan must stop bothering !!!! with him I do not want to have to do that!
He always tells me that I'm fake, I'm not Italian, I'm fucking chasing me under the cloak for another person! that I want to sell my 3D prints.

I said I did not sell anything and did not do anything!

If we do not think moderators put it in line, I'll send it to you .....
 
Joined
Feb 1, 2017
Messages
670
Points
0
Hi 3D,
Yes as Diachi said make sure the 12mm module holding the diode is flush and even with the top the heat sink for ultimate heat dispersion into the main sink. Your diode will thank you for it in the long run. Nice build..well done on to the next one..

Rich:)


Ciao Riccà ,

Yep , i see ! the next build will be better ! I promise :beer:
 
Joined
Jul 10, 2015
Messages
9,799
Points
113
3Dlaserbuilder you have DOUBLE POSTED 6 TIMES in this thread, I will neg rep you as much as I can until you stop and report the problem, you can edit your post like we all do our best to avoid double posting, there is no reason for it to continue.

----EDIT----

Can someone tell me how I can block him?
 
Last edited:
Joined
Jan 29, 2014
Messages
12,031
Points
113
Alaskan must stop bothering !!!! with him I do not want to have to do that!
He always tells me that I'm fake, I'm not Italian, I'm fucking chasing me under the cloak for another person! that I want to sell my 3D prints.

I said I did not sell anything and did not do anything!

If we do not think moderators put it in line, I'll send it to you .....

I'm always? That's not true. Your english improves tremendously when miffed.

This is the last time I post anything to you. Get on with your thread, you are taking time to respond again when you don't need to, derailing your own thread.
 
Last edited:

Encap

0
Joined
May 14, 2011
Messages
6,113
Points
113
3Dlaserbuilder you have DOUBLE POSTED 6 TIMES in this thread, I will neg rep you as much as I can until you stop and report the problem, you can edit your post like we all do our best to avoid double posting, there is no reason for it to continue.

I'm always? That's not true. Your english improves tremendously when miffed.

This is the last time I post anything to you. Get on with your thread, you are taking time to respond again when you don't need to, derailing your own thread.

Exactly---very annoying double posting and so are the meaningless little child chat-like posts --also the centering of text for no reason 3D.

Do better than that.

How old are you if I may ask.
All of your posts and the avatar point to very young maybe 10 to 14 yrs. old?
Would help explain the above and other observations about your posts, to many members.
 
Last edited:
Joined
May 30, 2016
Messages
964
Points
0
Hy Folks ,


I decided to put them inside these two hosts .... what do you think?

I called them: The Elegant Robust & Marine Shooter


n6cbio.jpg


wi1x6p.jpg



New Photos

w6w3lu.jpg


iqe8ls.jpg

What is sticking out of the flashlights and why are they covered in tar? What's going on here?
 




Top