Hey alaskan, 808nm emissions from my non-IR-filtered DPSS lasers seem to be reading around 803-805nm. So not too big of a difference, but you'll have to correct for it or set calibration points closer to 808 (mine were 473 and 633 - quite far away.)
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Killer deal on USB spectrometer! (update: legitimate!)
- Thread starter Sta
- Start date
Alaskan
0
- Joined
- Jan 29, 2014
- Messages
- 12,031
- Points
- 113
Good 
Appreciate the test.
Appreciate the test.
- Joined
- Jan 7, 2007
- Messages
- 6,309
- Points
- 83
You dudes poked my interest. I had
to order one --- Thanks ---------
HM
to order one --- Thanks ---------
HM
- Joined
- Jan 7, 2007
- Messages
- 6,309
- Points
- 83
He asked me to wait 3-4 weeks. Its now been
4 weeks and no tracking number or communication.:yabbmad:
I questioned again through ebay.
HM
He replied quickly and says I'll have a tracking # tomorrow.
4 weeks and no tracking number or communication.:yabbmad:
I questioned again through ebay.
HM
He replied quickly and says I'll have a tracking # tomorrow.
Last edited:
- Joined
- Sep 20, 2008
- Messages
- 17,622
- Points
- 113
I ordered one as well and it took over 4 weeks
to get here. It seems like he builds them as ordered.
I opened it up to have a look inside...
Quality wise... it is slapped together. The slit mounting
slot was cut with a hacksaw while he was drunk or
having a Parkinson's Episode.
The Camera and grating are mounted with double back
tape and the slit is mounted with Scotch type magic
tape.
Now I know why it was so cheap.
I'd get on his butt for a tracking number ASAP.
Jerry
Last edited:
That is unfortunate. The build quality apparently has much to aspire to. But given that these have an accuracy of 1nm I think I can forgive the build quality - it's still a better deal than anyone could have gotten before for that kind of precision. :beer:
- Joined
- Sep 20, 2008
- Messages
- 17,622
- Points
- 113
I agree... for the price I can live with the lousy
build quality. That's why I didn't open a duspute.
I'll just need to be extra careful not to shake or
jostle the enclosure too much to dislodge any badly
mounted parts inside.:yh:
Jerry
- Joined
- Sep 20, 2013
- Messages
- 17,414
- Points
- 113
My USB2000 has 2048 pixels and has a very solid optical bench with all optics made of metal (except, of course the CCD) and it requires eight lines for proper calibration and the manual states it needs to be recalibrated yearly. Even this very solidly built spectrometer drifts somewhat over time according to the manual.
- Joined
- Sep 20, 2013
- Messages
- 17,414
- Points
- 113
For those who think the USB2000 spectrometer uses a lens, I assure you it doesn't. It has a slit, a collimating mirror, a diffraction grating and a focus mirror, all made of highly polished metal alloy. They are all mounted very securely in a machined optical bench that weighs about 400 grams. It seems to me to be made to drift as little as possible, but since it can be set to resolve a line down to 0.1nm (according to the manual) I guess it can drift.
- Joined
- Jan 7, 2007
- Messages
- 6,309
- Points
- 83
Lasersbee --
Thanks for the update. I may affix the "loose stuff"
with a few drops of UV cure glue.
He says that I'll have the tracking number tomorrow.
HM
Thanks for the update. I may affix the "loose stuff"
with a few drops of UV cure glue.
He says that I'll have the tracking number tomorrow.
HM
- Joined
- Sep 20, 2008
- Messages
- 17,622
- Points
- 113
There you go Mike...Lasersbee --
Thanks for the update. I may affix the "loose stuff"
with a few drops of UV cure glue.
He says that I'll have the tracking number tomorrow.
HM
Good Idea on the UV cure glue.
Gotta get me some of that stuff.
Jerry
- Joined
- Jan 7, 2007
- Messages
- 6,309
- Points
- 83
I try to talk my dentist into giving me
outdated glue. He can't believe my
405 lasers! RAPID cure.
HM
outdated glue. He can't believe my
405 lasers! RAPID cure.
HM
- Joined
- Sep 20, 2013
- Messages
- 17,414
- Points
- 113
I can see it now. A dentist using a BDR-209 laser to cure dental fillings. Could be painful. JK.
- Joined
- Jan 7, 2007
- Messages
- 6,309
- Points
- 83
I should mention that I defocus
the output for glue.
Actually, my dentist's "UV" device
looks more 450 nM.
HM
the output for glue.
Actually, my dentist's "UV" device
looks more 450 nM.
HM
Last edited:
- Joined
- Sep 20, 2013
- Messages
- 17,414
- Points
- 113
Hope that doesn't make it impossible to refocus it. I have no idea what this guy is using to get a beam collimated to the camera he uses.
- Joined
- Feb 12, 2016
- Messages
- 589
- Points
- 63
Hi Sta,
Is this the cheap Spectometer you say works very well?
Mini USB Spectrometer Spectromètre Spektrometre - Alluminum Boxe
Hi Hemlock Mike and Paul,
The modern light-curable dental fillers cure at 450nm, the older ones I think did at 405nm only. This is because of new generation of photoinitiators.
My friends chemists now start to commercialise a super glue setting at same WL range thanks to a similar PI, but of course much cheaper than stuff for dentists.
Light Lock Glue
Is this the cheap Spectometer you say works very well?
Mini USB Spectrometer Spectromètre Spektrometre - Alluminum Boxe
Hi Hemlock Mike and Paul,
The modern light-curable dental fillers cure at 450nm, the older ones I think did at 405nm only. This is because of new generation of photoinitiators.
My friends chemists now start to commercialise a super glue setting at same WL range thanks to a similar PI, but of course much cheaper than stuff for dentists.
Light Lock Glue
