Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

FS: 9mm Copper Module (1/2" round diameter)

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
This is 1/2" copper material, and threaded for AixiZ...

It is specifically sized for the new 9mm 445 diodes...

Sized to fit my 405-G-1 glass lens assembly perfectly. (will fit the AixiZ 3 element lens as well, but that lens will stick out the front a little - same as with an AixiZ module)

So if you would like a nice 1/2" thick copper module, they are available! :D

At request, I can machine them down to AixiZ size. But I'd add $7 bucks for the extra work...





Also, several of my kits that I offer a press fit heatsink option for, can be fit for this 9mm size. :)





I can fit any one of my kit heatsinks to accept this 1/2" module. (N/C when ordering a kit - just make sure to let me know)

Copper module 4.jpg

Copper%20module 5.jpg

Copper%20module 6.jpg


Since these will be 1/2" in diameter, they will need a custom fit heatsink, and will not just fit into your 'AixiZ module heatsink'...





Any of my kits can be fit for this copper module for the same kit price...

Copper%20module 3.jpg






I realize that the price for the module seems expensive. But the material is not cheap. And I don't have CNC access.

So I have to make them one at a time on my lathe...

* 9mm Custom copper module - $28
* Shipping - $3
* Shipping policy:
Shipping Policy

Or for aluminum instead of copper, subtract $8 dollars. (cheaper material, and easier to work with)

PM me if you would like one! :)
 
Last edited:





DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Nice. I may need to pick one of these up.:beer:
 

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Sure thing...

Just let me know.

The press fit area is a nice tight fit on these 9mm versions... :)
 
Last edited:

JLSE

1
Joined
Dec 13, 2007
Messages
3,580
Points
0
I noticed 1/2' for the O.D, are you using this in lieu of the standard 12mm? I was also
thinking of doing this on my builds to avoid all the wasted copper stock into shavings
where I turn a 1/2' down to the 11.92mm.

Never hurts to have some additional mass on the modules either :beer:
 

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Yes it's easy to fit any heatsink for the copper module...

But at request, I can machine them down to AixiZ size. But I'd add $7 bucks for the extra work...




Jay you are on that man, those are beautiful:drool:!!

:thanks:

Let me know when your ready! :beer:
 
Last edited:




Top