LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Lava Micro FlexDrive Driver (lavadrive2) fits pens
- Thread starter drlava
- Start date
- Status
drlava
0
- Joined
- Mar 7, 2007
- Messages
- 1,152
- Points
- 0
Re: Lava Micro FlexDrive Driver (lavadrive2) fits
thanks
Yes your order has been received and will ship shortly. You will receive a google checkout notice when it is shipped.DocX said:
thanks
- Joined
- Oct 11, 2008
- Messages
- 134
- Points
- 0
Re: Lava Micro FlexDrive Driver (lavadrive2) fits
hey my drivers arrived yay ;D
but im trying to solder my groove kit now and its incredibly hard to get the solder to stick
any suggestions
hey my drivers arrived yay ;D
but im trying to solder my groove kit now and its incredibly hard to get the solder to stick
any suggestions
daguin
0
- Joined
- Mar 29, 2008
- Messages
- 15,989
- Points
- 113
Re: Lava Micro FlexDrive Driver (lavadrive2) fits
Get and use some rosin paste.
Peace,
dave
spaceman_hux said:hey my drivers arrived yay ;D
but im trying to solder my groove kit now and its incredibly hard to get the solder to stick
any suggestions
Get and use some rosin paste.
Peace,
dave
- Joined
- Nov 24, 2007
- Messages
- 2,735
- Points
- 0
Re: Lava Micro FlexDrive Driver (lavadrive2) fits
Get and use some rosin paste.
Peace,
dave[/quote]
What is the differencee between flux and rosin?
daguin said:[quote author=spaceman_hux link=1209418066/660#674 date=1227326882]hey my drivers arrived yay ;D
but im trying to solder my groove kit now and its incredibly hard to get the solder to stick
any suggestions
Get and use some rosin paste.
Peace,
dave[/quote]
What is the differencee between flux and rosin?
daguin
0
- Joined
- Mar 29, 2008
- Messages
- 15,989
- Points
- 113
Re: Lava Micro FlexDrive Driver (lavadrive2) fits
Rosin IS the flux. Rosin is the material. Flux is the action. I prefer paste because my hand shakes.
Also, pre-tinning the contacts helps.
Peace,
dave
Spyderz20x6 said:
Rosin IS the flux. Rosin is the material. Flux is the action. I prefer paste because my hand shakes.
Also, pre-tinning the contacts helps.
Peace,
dave
- Joined
- Nov 24, 2007
- Messages
- 2,735
- Points
- 0
Re: Lava Micro FlexDrive Driver (lavadrive2) fits
[highlight]Rosin IS the flux.[/highlight] Rosin is the material. Flux is the action. I prefer paste because my hand shakes.
Also, pre-tinning the contacts helps.
Peace,
dave[/quote]
Oh...
Yeah, i always use paste, too.
daguin said:
[highlight]Rosin IS the flux.[/highlight] Rosin is the material. Flux is the action. I prefer paste because my hand shakes.
Also, pre-tinning the contacts helps.
Peace,
dave[/quote]
Oh...
Yeah, i always use paste, too.
- Joined
- Sep 7, 2008
- Messages
- 396
- Points
- 18
Re: Lava Micro FlexDrive Driver (lavadrive2) fits
Rosin IS the flux. Rosin is the material. Flux is the action. I prefer paste because my hand shakes.
Also, pre-tinning the contacts helps.
Peace,
dave[/quote]
Pre-tinning? What's that?
daguin said:
Rosin IS the flux. Rosin is the material. Flux is the action. I prefer paste because my hand shakes.
Also, pre-tinning the contacts helps.
Peace,
dave[/quote]
Pre-tinning? What's that?
daguin
0
- Joined
- Mar 29, 2008
- Messages
- 15,989
- Points
- 113
Re: Lava Micro FlexDrive Driver (lavadrive2) fits
You melt a little solder on the contacts BEFORE you solder the connection. Then the solder on the "pre-tinned_ contacts flows together swiftly and smoothly.
Peace,
dave
Bearded_Galaxy said:
You melt a little solder on the contacts BEFORE you solder the connection. Then the solder on the "pre-tinned_ contacts flows together swiftly and smoothly.
Peace,
dave
- Joined
- Sep 7, 2008
- Messages
- 396
- Points
- 18
Re: Lava Micro FlexDrive Driver (lavadrive2) fits
You melt a little solder on the contacts BEFORE you solder the connection. Then the solder on the "pre-tinned_ contacts flows together swiftly and smoothly.
Peace,
dave
[/quote]
Ah, OK.
daguin said:
You melt a little solder on the contacts BEFORE you solder the connection. Then the solder on the "pre-tinned_ contacts flows together swiftly and smoothly.
Peace,
dave
[/quote]
Ah, OK.
- Joined
- May 7, 2008
- Messages
- 545
- Points
- 0
Re: Lava Micro FlexDrive Driver (lavadrive2) fits
hey dr. lava,
I had an issue with one of my blu-ray customers thinking the his phr-803t pen pointer wasnt as high powered as it was tested for so he sent it back to me and I turned it up. In doing I had to solder the little bridge on the driver to get it into the higher mA range. Since I put it back together however it almost seems like it is in a pulsing mode. The batteries are connected completely and the connection is perfect. However when i move the pointer quickly around, the perfect line is now segmented in equally length segments with equal spacing between them and it varies proportionately with the speed at which I move the pointer. Is there some kind of setting I missed? I have the same bridged set up on my 6x blu-ray and it doesnt pulsate at all. I am worried about sending it back to him.
-Paul
hey dr. lava,
I had an issue with one of my blu-ray customers thinking the his phr-803t pen pointer wasnt as high powered as it was tested for so he sent it back to me and I turned it up. In doing I had to solder the little bridge on the driver to get it into the higher mA range. Since I put it back together however it almost seems like it is in a pulsing mode. The batteries are connected completely and the connection is perfect. However when i move the pointer quickly around, the perfect line is now segmented in equally length segments with equal spacing between them and it varies proportionately with the speed at which I move the pointer. Is there some kind of setting I missed? I have the same bridged set up on my 6x blu-ray and it doesnt pulsate at all. I am worried about sending it back to him.
-Paul
- Joined
- May 7, 2008
- Messages
- 545
- Points
- 0
Re: Lava Micro FlexDrive Driver (lavadrive2) fits
oh sweet. thank you.
oh sweet. thank you.
Bibibig
0
- Joined
- Nov 24, 2008
- Messages
- 28
- Points
- 3
Re: Lava Micro FlexDrive Driver (lavadrive2) fits
- Status
