LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Anyone know an easy way to drill through washers?
- Thread starter toked323
- Start date
- Joined
- Oct 26, 2007
- Messages
- 5,438
- Points
- 83
Re: Anyone know an easy way to drill through washe
Don't washers already have a hole? What kind of drilling do you want done?
Don't washers already have a hole? What kind of drilling do you want done?
- Joined
- Apr 1, 2008
- Messages
- 3,924
- Points
- 0
Re: Anyone know an easy way to drill through washe
Use a high powered laser, I hear they are wonderful ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D Sorry, couldn't resist. How about a drill press & titanium bits ? phoenix77/rob
Use a high powered laser, I hear they are wonderful ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D Sorry, couldn't resist. How about a drill press & titanium bits ? phoenix77/rob
- Joined
- Jul 24, 2008
- Messages
- 1,415
- Points
- 36
Re: Anyone know an easy way to drill through washe
i use a vise with grooves and put the washer in and drill with my drill on slow and dont put much pressure on it so it doesn't bend.
just go slow and be careful
drill press would be best though
i use a vise with grooves and put the washer in and drill with my drill on slow and dont put much pressure on it so it doesn't bend.
just go slow and be careful
drill press would be best though
rkcstr
0
- Joined
- Dec 1, 2007
- Messages
- 1,368
- Points
- 0
Re: Anyone know an easy way to drill through washe
Drill and bit? I like step bits.
Drill press would be even better.
Drill and bit? I like step bits.
Drill press would be even better.
rog8811
0
- Joined
- Jul 24, 2007
- Messages
- 2,749
- Points
- 0
Re: Anyone know an easy way to drill through washe
I echo the step drill as it helps to prevent the judder that you will get using a standard drill.....
I personally would use a lathe but I know that is not an option for everyone.
regards rog8811
I echo the step drill as it helps to prevent the judder that you will get using a standard drill.....
I personally would use a lathe but I know that is not an option for everyone.
regards rog8811
- Joined
- Feb 18, 2008
- Messages
- 733
- Points
- 18
Re: Anyone know an easy way to drill through washe
I have done this before! ;D The best way to do it is by firmly securing it to a drill press and slowly lowering the drill into it to get a clean hole. Now, if you want the hole for an axiz module then use a 17/32 drill bit.
--hydro15
I have done this before! ;D The best way to do it is by firmly securing it to a drill press and slowly lowering the drill into it to get a clean hole. Now, if you want the hole for an axiz module then use a 17/32 drill bit.
--hydro15
Re: Anyone know an easy way to drill through washe
I use step bits also, but the problem is i cant get a good grip on wasshers without bending them.
I think I might buy a drill press this place called BigLots buy me sells them with a vice for 49.99$
thanks all for the help, Toked323
rkcstr said:
I use step bits also, but the problem is i cant get a good grip on wasshers without bending them.
I think I might buy a drill press this place called BigLots buy me sells them with a vice for 49.99$
thanks all for the help, Toked323
rog8811
0
- Joined
- Jul 24, 2007
- Messages
- 2,749
- Points
- 0
Re: Anyone know an easy way to drill through washe
Try ebay first, I picked up a good one for $21 yesterday (item 220271468767 ) The cheap ones for the DIY market are a bit flimsy sometimes.
Regards rog8811
[edit] I thought I would show you what you can get for £10.50 from ebay[/edit]
Try ebay first, I picked up a good one for $21 yesterday (item 220271468767 ) The cheap ones for the DIY market are a bit flimsy sometimes.
Regards rog8811
[edit] I thought I would show you what you can get for £10.50 from ebay
[/edit]Attachments
rkcstr
0
- Joined
- Dec 1, 2007
- Messages
- 1,368
- Points
- 0
Re: Anyone know an easy way to drill through washe
The few times that I've enlarged the hole in a washer, I think I just clamped one (very tightly!) in a vise-grip (locking pliers) and used my drill/step bit to enlarge it. Also, I've found a cordless impact driver better than a standard cordless drill, like this one, as it doesn't bind up while drilling and drills much faster.
EDIT: when I say clamp in vise grips, I mean clamp to one edge of the washer, NOT try to "hold" it by the edges with the pliers since you will likely not get a very good grip on it that way and it will likely bend if you put a lot of pressure on it.
The few times that I've enlarged the hole in a washer, I think I just clamped one (very tightly!) in a vise-grip (locking pliers) and used my drill/step bit to enlarge it. Also, I've found a cordless impact driver better than a standard cordless drill, like this one, as it doesn't bind up while drilling and drills much faster.
EDIT: when I say clamp in vise grips, I mean clamp to one edge of the washer, NOT try to "hold" it by the edges with the pliers since you will likely not get a very good grip on it that way and it will likely bend if you put a lot of pressure on it.
- Joined
- Jul 24, 2008
- Messages
- 1,415
- Points
- 36
Re: Anyone know an easy way to drill through washe
yeah my bosch 18volt impact kicks ass on drilling or anything really.
yeah my bosch 18volt impact kicks ass on drilling or anything really.
rog8811
0
- Joined
- Jul 24, 2007
- Messages
- 2,749
- Points
- 0
diachi
0
- Joined
- Feb 22, 2008
- Messages
- 9,700
- Points
- 113
Re: Anyone know an easy way to drill through washe
How much did the shipping on that thing cost :-?
How much did the shipping on that thing cost :-?
rog8811
0
- Joined
- Jul 24, 2007
- Messages
- 2,749
- Points
- 0
Re: Anyone know an easy way to drill through washe
Zilch on the shipping, it was 30 minutes up the road from me ;D
Regards rog8811
Zilch on the shipping, it was 30 minutes up the road from me ;D
Regards rog8811
- Joined
- Jan 7, 2007
- Messages
- 6,309
- Points
- 83
Re: Anyone know an easy way to drill through washe
For better grab, slit the side of a piece of pipe/tubing which fits the od of the washer. Place the washer in the pipe and clamp it with a vice to hold it. A bit extreme but it depends on your needs.
Mike
For better grab, slit the side of a piece of pipe/tubing which fits the od of the washer. Place the washer in the pipe and clamp it with a vice to hold it. A bit extreme but it depends on your needs.
Mike
