Will this lathe work for copper?

[T_Warne]

@ letzrok
The package came with 5 center drills of different sizes.

@ Jake21
I found a document on http://groups.yahoo.com/group/7x12minilathe about threading. Here is the link, but you may need to join the group to access it.

http://f1.grp.yahoofs.com/v1/sDXQSU...MTKF2BYhxMxrDvjnzl8K9xteqdjcQ/HowToThread.txt

 

[Hemlock_Mike]

Spyderz --

Confused yet ? ;D ;D ;D

Mike

 

[Spyderz20x6]

Spyderz --

Confused yet ?  ;D  ;D  ;D

Mike

Confused is an understatement ;D

 

[FrancoRob]

So will I be able to machine my own hosts using SAE threads?
Will I be able to cut threads for AixiZ lenses?

What is the difference between SAE threads and metric threads?
Will I be able to get by just using SAE threads?

Can I have a list of everything I will need to get started with a lathe?


Thanks guys, I appreciate it.

In short words, SAE means "thread per inch", while metric means "threads per cm." Of course a SAE thread will not screw on a metric thread, also if the "male" diameter is compatible with the "fem" diameter, as the pitch is different.
In the web you'll find a lot of info about; the first thing to understand what type of threads you have, is to buy a "gauge" set for SAE and a "gauge" set for metric.....

Just to give you a preliminar idea, see:

http://mdmetric.com/tech/tict.htm

or:

http://machinedesign.com/article/name-that-thread-1021

and:

http://www.nmri.go.jp/eng/khirata/metalwork/lathe/screw/index_e.html

 

[rog8811]

I have been using lathes for nearly 40 years and I still screw up screw threads, I have found that scrap cameras are a good source of mating thereads, I just adapt them and stick them in place with araldite it works well and is a lot easier

The thread at the end of this barrel is from a camera lens I took apart, the other bit is press fitted into the cap...

Regards rog8811