Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

what kind of tool do you use?

Joined
Feb 19, 2009
Messages
879
Points
18
well i actually have 2 questions.

1st- what kind of tool do you use to harvest a diode from an aixiz module?
2nd-well i have a diode but i dont know if its red or IR. can someone tell me how i could figure this out? much help would be greatly appreciated thanks!
 





If I care about the diode I use a piece of hollow antenna that will just fit over the can and press it out on my vice. If I don't care I use a punch and a hammer [smiley=evil.gif]

About the only way to tell what kind of a diode an unknown is, is to give it some power and see what color comes out the end ;)

Peace,
dave
 
daguin said:
If I care about the diode I use a piece of hollow antenna that will just fit over the can and press it out on my vice.  If I don't care I use a punch and a hammer  [smiley=evil.gif]

About the only way to tell what kind of a diode an unknown is, is to give it some power and see what color comes out the end ;)

Peace,
dave


hhahahahaha k sounds good thanx!!! :) :) :)
 
what kind of tool do you use to harvest a diode from an aixiz module?
A small length of brass tubing from a hobby shop (they sell different diameters). If the tubing is a bit too big, I use a small saw to cut slots down length wise about 1/4" so it can fit.
 


Back
Top