Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Violet laser 303 gets super weak

LiveRay

LiveRay

0
Joined
Jul 21, 2016
Messages
15
Points
3
Hey there,

I'm in rage, because my second violet laser 303 got extremely weak. I've heard that this often happens to violet lasers. ��
The biggest problem is that I don't have access to the driver.
Is this repairable and if so, how?

(I've fully charged the batteries)
 
Last edited:





405nm 303s are known to do this because they are built with the worst diodes available. There is no way to repair this except for buying a new one.
 
Sta said:
405nm 303s are known to do this because they are built with the worst diodes available. There is no way to repair this except for buying a new one.
Click to expand...


This^^

It's dead, I've had two of them die after <5 minutes of use. Don't recommend the 405nm 301/3s for that reason. The 532nms are decent at least.

Not a big loss at least, seeing as they are so cheap.
 
Only the 532nm 303/301 lasers are any good based on my experience. The red and violet ones just plain suck. I had a violet one where they didn't even put a strain reliever under the driver board, so every time you pushed on the button you were bending the diode pins. At least the green ones I've owned had a strain relief under the drivers.
 
Last edited:
diachi;1455g455 said:
This^^
Not a big loss at least, seeing as they are so cheap.
Click to expand...

Yeah, they're quite cheap, but ironically the green ones are quite cheaper.
 
I suppose this is about a specific vendor?

The host and wavelength don't seem problematic as such.

If these diodes actually fail in 5 minutes they are overdriving them pretty hard though, or they are using reject diodes or something like that.
 
yeahh it this happen to the 303 violets 1 out of 3 are ok
some 303s you can just pull out the module and diode i have a some of 303's collected the most powerful ones
YL-Laser and PM-Laser the PM-laser is the most powerful one and hard to get if your lucky the seller may ship you one
 
Last edited:
Hello I bought an ebay YL 303 violet laser and i put a full charge 18650 inside and its barely visible! is this normal? 3.7v battery 5mw laser :( would apreciate any kind of help
 
Brock Lee said:
Hello I bought an ebay YL 303 violet laser and i put a full charge 18650 inside and its barely visible! is this normal? 3.7v battery 5mw laser :( would apreciate any kind of help
Click to expand...


405nm is not very visible to our eyes to begin with. How "barely visible" is it? Got pictures?
 
Last edited:
LiveRay said:
Hey there,

I'm in rage, because my second violet laser 303 got extremely weak. I've heard that this often happens to violet lasers. &#55357;&#56852;
The biggest problem is that I don't have access to the driver.
Is this repairable and if so, how?

(I've fully charged the batteries)
Click to expand...

You can't really expect much for approx. the price of a good cup of coffee.

If you wanrt a good 405nm have a look here: PL-E mini 445nm 450nm Blue Laser

Or here: https://www.sanwulasers.org/
 
Last edited:
true
not everbody sees 405s the same.
In rare cases some people can see IR or UV when others cannot .
Hope you understand that the mW is not the only factor--the wavelength is also important.
IMHO that makes 405nm the most dangerous visible wavelength and despite how 'dim' it may look no 405s should never be given to kiddos to 'play with'. (or many adults too)
 
You must log in or register to reply here.


Back
Top