!!UPDATE-CLOSED AND ALL SENT--Gb#2 jetlasers IS NOW ON>PM Gray w/request

[hakzaw1]

Re: !!UPDATE!!Gb#2 jetlasers IS NOW ON>PM Gray w/request

Nice laser hakzaw1, this Ti is really sexy.
I will buy from jetlasers again.

Cheers

Gray(& JETL) deserve the compliment- It sure feels nice in my hand and I think it is waterproof too-- at least it is for sure water-resistant.
And at the GB price of 220$ it is a lot of bang per buck.

I hope they will have these in stock soon. Isaac got the only one available atm. I want one for sure.

Maybe JETL will do 445nm and 12X 405nm in Titanium(hint hint!!!)

thanks for the kind words - Lady Regina


hak

 

[IsaacT]

Re: !!UPDATE!!Gb#2 jetlasers IS NOW ON>PM Gray w/request

Awesome! Just sent shipping funds! Thanks again for everything Len!!!

 

[hakzaw1]

Re: !!UPDATE!!Gb#2 jetlasers IS NOW ON>PM Gray w/request

I thought I had a serious prob w/ my LB1 but after I sent all the lasers out from the GB i checked and it was only a loose connection at the plug-in. I would have liked to have metered all of those with both meters- and The lasersbee shows peak better. I did remeter the 650nm PL-C- 250 that Gray offered in this GB for 260$ -(reg. price $500) It was sold to me as a 250mW but the LB shows a peak of 384mWs of sweet RED!!! The best I had before this one was only 100mW red labbies. so this is a big jump for me.

One thing I did notice- on the second round of PL-C 250mW 532nms- some of the better brand 18650s(black AW from Lighthound) are a very tight fit--too tight for me to risk having a problem getting it back out. The cheapies slide in and out w/ n/p.
Anybody have a suggetion to remedy this???

T Y hak

here are some shots by my firepit- beam and a few off one of my spinner mirrors

 

[IsaacT]

Re: !!UPDATE!!Gb#2 jetlasers IS NOW ON>PM Gray w/request

Hey, I have a question about batteries...will the cheap batteries Rayfoss sends bring out the potential of my laser or will I need to get a different, higher quality battery?

 

[hakzaw1]

Re: !!UPDATE!!Gb#2 jetlasers IS NOW ON>PM Gray w/request

Hey, I have a question about batteries...will the cheap batteries Rayfoss sends bring out the potential of my laser or will I need to get a different, higher quality battery?

When freshly charged I think there may not be much diff. but quality batts seem to last longer IMO. For those photos I took of your Ti I used Ultrafires.(blue)

 

[IsaacT]

Re: !!UPDATE!!Gb#2 jetlasers IS NOW ON>PM Gray w/request

Ah, wonderful, those are the same ones I have

 

[Boosted240]

Re: !!UPDATE!!Gb#2 jetlasers IS NOW ON>PM Gray w/request

Here is a copy of a question/ answer I had with forum member LarryDFW:

Originally Posted by Boosted240
I use 18650s for an Arctic Spyder 3, another 1.2w 445 build, and a P7 LED flashlight. I am also about to get a Jetlasers 250mw-300mw 532.

I have been using these: Li-Ion 18650 3.7V 2600mAh rechargeable battery Flat Top FULLY PROTECTED with PCB Lithium Ion
As recomended by another forum member.
What would be the difference or benefit of your cells as opposed to what I have been using?

Thanks for your time!

Hi Boosted;

The Sanyo batteries I have are U.L. tested for shorts, overcurrent and overcharging.

They also have the lowest "internal resistance" of many different brands I have tested.

You Jetlaser will have a 2 watt IR diode which will draw ~3amps.

Many protection PCB's will start limiting current close to this level.

The Sanyo cells will deliver this current easily.

Fubata boosted his 350mw green with these Sanyo cells:
> 350mw putting out over 700mw - 532nm CNI PGL-III-C

 

[hakzaw1]

Re: !!UPDATE!!Gb#2 jetlasers IS NOW ON>PM Gray w/request

Know this- the AW 2600mAh from Lighthound are top shelf quality but at 17.39mm are a VERY tight fit- my cheapie 'yellow' A123 from ebay fits easily at 17.12mm and the pinkish one sent to me by Luke(yobresal) NDHFJ32- is 17.06.

So a good question to ask before buying the sanyos(or any others) would be...How big are they?.... I dont know if it is a bad idea to peel of the outer plastic layer on These larger batts.

I do know that I would not like to try to enlarge the ID of my new PL-C. The larger size 18650s fit fine on the first PL-C that I got from JETL.

 

[Boosted240]

Re: !!UPDATE!!Gb#2 jetlasers IS NOW ON>PM Gray w/request

Well I've already ordered a pair, so lets hope they fit.

 

[Monadnock]

Re: !!UPDATE!!Gb#2 jetlasers IS NOW ON>PM Gray w/request

Fuuuu@#k!!!! My Lighthound's measure 18.35mm!!!!!!!! Not even remotely close to possibly kinda fitting

 

[hakzaw1]

Re: !!UPDATE!!Gb#2 jetlasers IS NOW ON>PM Gray w/request

IF I place my caliper just below the silver label I get 17.14mm.

If the outer layer of plastic can be removed w/o causing a short etc then maybe the AWs will fit . I guess This could be verified with meter.

DUHHHH!! I just peeled the silver label from my AW and now it fits OKay..So I think you will be ok.

 

[Monadnock]

Re: !!UPDATE!!Gb#2 jetlasers IS NOW ON>PM Gray w/request

Yeah, unfortunately my measurement was also taken below the fancy silver label. IDK why there's so much discrepancy between 18650 cells. I do know is my laser is coming in today and I ain't gonna be able to play with it.

Ill just d/l the lightsaber app for my Droid and wave them both around like a jackass listening to the cool noise. Hmmmmm..........wonder how many of you guys have already done that with yer smartphones!? LMAO cuz I bet its quite a few.

 

[Boosted240]

Re: !!UPDATE!!Gb#2 jetlasers IS NOW ON>PM Gray w/request

Ill just d/l the lightsaber app for my Droid and wave them both around like a jackass listening to the cool noise. Hmmmmm..........wonder how many of you guys have already done that with yer smartphones!? LMAO cuz I bet its quite a few.

Don't forget the phaser app too...

 

[hakzaw1]

Re: !!UPDATE!!Gb#2 jetlasers IS NOW ON>PM Gray w/request

Yeah, unfortunately my measurement was also taken below the fancy silver label. IDK why there's so much discrepancy between 18650 cells. I do know is my laser is coming in today and I ain't gonna be able to play with it.

Ill just d/l the lightsaber app for my Droid and wave them both around like a jackass listening to the cool noise. Hmmmmm..........wonder how many of you guys have already done that with yer smartphones!? LMAO cuz I bet its quite a few.

JUST PEEL OFF THE SILVER LABEL....:angel:

 

[Monadnock]

Re: !!UPDATE!!Gb#2 jetlasers IS NOW ON>PM Gray w/request

Don't forget the phaser app too...

LOL! D/L'ing now

 

[Boosted240]

Re: !!UPDATE!!Gb#2 jetlasers IS NOW ON>PM Gray w/request

Well I hope the Sanyo cells I bought fit it.. I wanted to use those instead of the Tenergy cells...