Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Laser Pointer Store

Their on their way!

Lifetime17

Well-known member
LPF Site Supporter
Joined
Dec 15, 2014
Messages
4,503
Likes
1,223
Points
113
Hi BM,
your going to like the laser with that 10X BE, i have a 10X on a sinner 462 and it will do this at 32 feet +
 

Attachments


BobMc

Well-known member
Joined
Apr 23, 2016
Messages
3,798
Likes
881
Points
113
Hi BM,
your going to like the laser with that 10X BE, i have a 10X on a sinner 462 and it will do this at 32 feet +
Thanks Rich, those are some awesome burn marks at 35 feet. Now I'll be able to sign my name from across the street. :)

Will the 10x screw/fit on the standard 12mm module or did you make an adapter for it.
 

Lifetime17

Well-known member
LPF Site Supporter
Joined
Dec 15, 2014
Messages
4,503
Likes
1,223
Points
113
HI BM,
No i didn't make the adapter it was done by Sulman of Sinner when i bought the host for it. The threads are 25 x 0.5 and working on getting the tooling for these BE's. The way that the 3x Sanwu BE sits on a laser will not do due to the 10x is much larger and heavier. So the back of the adapter should be machined to fit around the OD of the laser with set screws. i changed the set screws in mine to nylon tipped so not to mar the finish..
 

Attachments

BobMc

Well-known member
Joined
Apr 23, 2016
Messages
3,798
Likes
881
Points
113
HI BM,
No i didn't make the adapter it was done by Sulman of Sinner when i bought the host for it. The threads are 25 x 0.5 and working on getting the tooling for these BE's. The way that the 3x Sanwu BE sits on a laser will not do due to the 10x is much larger and heavier. So the back of the adapter should be machined to fit around the OD of the laser with set screws. i changed the set screws in mine to nylon tipped so not to mar the finish..
Gotcha, very nice adapter , think the nylon tipped screws are a nice addition. When you get the tooling give me a shout, like to talk to you about making one for me. When you have the time. Hope all is well :)
 

Lifetime17

Well-known member
LPF Site Supporter
Joined
Dec 15, 2014
Messages
4,503
Likes
1,223
Points
113
Hi BM,
Yes i will when i get the tooling contacted the machine shop about ordering yesterday. Just been very busy at my job lately, I will start a new sales thread combining all the hosts, heat sinks and focus rings in one spot for easy viewing this weekend.

Rich:)
 




Top