Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Sinner copper core 2X26650 NUGMO3

Lifetime17

Lifetime17

0
Joined
Dec 15, 2014
Messages
6,773
Points
113
Hi LPF,
Want to share a great host I forgot about a Sinner 2X26650. In it is a NUMGO3 diode open can/SXD /G2 . I swapped the focus adapter and machined a copper one to compliment the copper core.Enjoy all , Like a blast from the past.

Rich:)fullsizeoutput_a29.jpegfullsizeoutput_a21.jpegfullsizeoutput_a20.jpegfullsizeoutput_a1f.jpegIMG_4452.JPGfullsizeoutput_a22.jpeg
 





Looking good, Rich, like you say, "a blast from the past"; you can't go wrong with a sinner host, especially one one like this that has the personal "Lifetime" touch! (y)

-Edit- Rich, I'm not familiar with that NUGM03 diode, what kind of output are you getting with it? Nevermind, I see the output, 1100mW.
 
Last edited:
Very nice and that copper cap, good sturdy looking host, love the nugm03's :)
 
I think that was one of the last hosts sinner put out for sale. It looks a bit like his MS-SSW-II host, but without the fins on the heat sink. I have two of those in my collection. One with an NDB7875 doing 3 watts and another with an NDG7475 doing 1100 mW. I used one of DTR's two element 520nm AR coated lenses on the green as it works better than the G2.
 
Hi Gents,
Thank you for the positive replies friends. The O3's tree a treat also next to the 700's and the 7475's . nAnd yes Paul I will try the 520 lens I have quite a few to. It will remove the die reflection ..

@ Red,
Hey I am impressed the the O3;s to pal great choice , have banks of 06's and 07's have to see the the out come,

@BTG,Yes its 1100mW's and yes a best from the past I have a few more of Sulman's host that I have never built. So its just hard to determine what to put in them buddy.

Rich:)
 
Yes, the die reflection was the main reason I used that lens over the G2. I got a half dozen of them when I found them to remove the die reflection from even the Sharp diodes too.
 
Hello Mr. Italia. I believe Sinner stopped making them but last I heard he was in UAE. Let me test if you are just being your flippant non-sense responding self, I have one, want to buy it?
 
Last edited:
paul1598419 said:
I think that was one of the last hosts sinner put out for sale. It looks a bit like his MS-SSW-II host, but without the fins on the heat sink. I have two of those in my collection. One with an NDB7875 doing 3 watts and another with an NDG7475 doing 1100 mW. I used one of DTR's two element 520nm AR coated lenses on the green as it works better than the G2.
Click to expand...

Works better eh? So more output, or the same? And gets rid of artifact?
 
Paul....Is the lens you are referring to as the " DTR's two element 520nm AR coated lenses " the G8 ???? If so....Yes....THIS removes the box/reflection artifact.....completely....and NO loss of power !!

Hey Shaken....Welcome back !!

Hey LT....You are in the " Nut Cracker Club " too !!...Sinner made some good stuff !!! CDB
 
It's a nice shape and I think would look good in solid brass including the focus knob and thumb button as well as a smaller unit for 1 x 18650 or 2 x 18350

fullsizeoutput_a20-jpeg.62834
 
Shakenawake said:
Works better eh? So more output, or the same? And gets rid of artifact?
Click to expand...
It only gets rid of the rectangular artifact, but at less output power. I don't think the G8 was available when I made that post. I suppose I should be more precise when mentioning how these lenses are better in certain builds.
 
You must log in or register to reply here.





Back
Top