Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,


:bumpit:


cheers,
Moe
 





Re: ALL SOLD !! The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,

All available builds have been sold !! Thank you, :thanks:

Look for new builds available soon...


cheers,
Moe
 
Re: ALL SOLD !! The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

how do I send a PM? I spend more time online lost than completing the things I came to do.
 
Re: ALL SOLD !! The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

how do I send a PM? I spend more time online lost than completing the things I came to do.

Greetings,

At the top hit user cp and then send message.

cheers,
Moe
 
Re: ALL SOLD !! The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,

At the top hit user cp and then send message.

cheers,
Moe

tried the PM thing don't think it worked. Even tried a second time don't think it worked then either. My sent box still shows 0.
 
Last edited:
The Scorcher Jr. 445nm 3.2w+ w/strobe

UPDATE: This build has been sold !!

Greetings,


Just built a Scorcher Jr., though this one uses a little different heatsink. Does not use a drop in module, and has the diode clamped in the heatsink. Everything else is the same. 9mm, 445nm-450nm diode with 4 mode driver, G9 lens. Uses 2x26650 or 2x18650 batteries with included adapter sleeves. The output of this build, measured using my LaserBee 3.7w USB LPM, and 2 fully charged MNKE 26650 batteries, is at 3.2w.
Asking price for this build is $235 CONUS and does include shipping and paypal fees.
It does not include safety glasses, batteries or charger. You should already have these, and if not take the time to look for good quality equipment. I would not trust the cheap glasses, batteries/charger that normally are included for my safety is paramount. Good Safety glasses and such are not cheap. Get good quality...

Here's a few pics....

PIC_0061_zps6ea06746.jpg


PIC_0062_zpsfdae3211.jpg


PIC_0063_zpsdd785424.jpg


PIC_0064_zpsf06ea078.jpg


PIC_0067_zps10299cc8.jpg


PIC_0066_zps3e816dd6.jpg


ScorcherJr2-2-14_zpsa5791cd9.jpg


I was holding the laser when testing and that's why at the end it went up and down a bit. She runs solid at 3.2w


cheers,
Moe
 
Last edited:
Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,


:bumpit:


cheers,
Moe
 
Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,

All available builds have been sold !! Thanks to all who have shown interest and especially to those who have made a purchase.
Thanks !! :thanks:
Look for more builds available soon !!

cheers,
Moe
 
Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Just received mine today... a very nice unit and quite a steal at the price. The brightness and color strength of this thing has to be seen in person to appreciate... absolutely dazzling. This is my first blue.

Seller was quick to reply to my questions and was very professional. Thanks Moe!

Anyone know if it is possible to modify it to directly select the mode instead of cycling thru them? I can wield a soldering iron and do some light machining but would like to get an idea beforehand what might be involved. If it's beyond my skills, that's good to know as well.
 
Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,

Thank you for the kind words, :worthy:

Would be fairly easy to just change the driver and pop in one with the setting you wanted. Only other way would be a multi position switch. Of course you can just do as most of us and have too many lasers. :eg:

cheers,
Moe

Just received mine today... a very nice unit and quite a steal at the price. The brightness and color strength of this thing has to be seen in person to appreciate... absolutely dazzling. This is my first blue.

Seller was quick to reply to my questions and was very professional. Thanks Moe!

Anyone know if it is possible to modify it to directly select the mode instead of cycling thru them? I can wield a soldering iron and do some light machining but would like to get an idea beforehand what might be involved. If it's beyond my skills, that's good to know as well.
 
The Scorcher Jr. 445nm 3w+ w/strobe

Greetings,

Just finished another Scorcher Jr. build, exactly like the previous build. Uses a zerolaser MX900 host, 9mm 445nm diode from DTR and lens is G9, pulled from diode. Batteries are 2x26650 or 2x18650 with included adapter sleeves.

Here's a few pic's;

PIC_0087_zps37ee0bfa.jpg


PIC_0088_zpsb64dce85.jpg


PIC_0092_zps45f67b2d.jpg


PIC_0091_zpsf7bfd841.jpg


PIC_0089_zps71a57764.jpg


PIC_0090_zps244c725f.jpg


PIC_0096_zps56f7b83a.jpg


PIC_0094_zps6318f75d.jpg


PIC_0097_zps9292fdd5.jpg


PIC_0093_zps610f4620.jpg


ScorcherJr22314_zpse391e463.jpg


This build runs solid at 3w+ and peaks at almost 3100mw. The duty cycle is 2 minutes. Asking price is $200 CONUS.

cheers,
Moe
 
Last edited:
Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,

Got the heatsinks from Mrcrouse for more Scorcher builds and once I get the rest of my parts, I should have several more Scorcher's available.

Check back soon !!

cheers,
Moe
 
Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

UPDATE : This build has been sold !
Greetings,

I have a new Scorcher build I just finished and this one is using a little different driver. It's a 5 mode 2.3a constant current driver very similar to my normal driver. This driver unlike the other does retain memory so will power on with the mode it was last on, or the next mode. It has 3 power settings, strobe and s.o.s. The duty cycle recommended is 3 minutes, but 4 or more is attainable. Running at 2.3a the output is just under 3w, but should provide longer diode life. The rest of the build is the same, using the MX900 host with heatsink and focus adapter by Mrcrouse, 9mm 445nm diode from DTR with G9 lens pulled from the diode. Uses 2x26650 or 2x18650 batteries with included adapter sleeves. Does not come with batteries, charger or glasses.

Here's some pic's,

PIC_0117_zpsb92b320e.jpg


PIC_0118_zpse1092155.jpg


PIC_0114_zpsf04918b5.jpg


PIC_0113_zpse973af24.jpg


PIC_0115_zps6518ced7.jpg


PIC_0116_zps6551db01.jpg


PIC_0119_zpsdf013e01.jpg


PIC_0120_zpsf9ca641f.jpg


PIC_0121_zps6fb757ff.jpg


PIC_0122_zps86bda127.jpg


PIC_0123_zps6962e1c3.jpg


Scorcher31414_zps35239466.jpg


Asking price for this build is $200.
Will post pic's of the build later today.

P.S. Check back over the next couple days as I will have 3 more ready using the normal driver....


cheers,
Moe
 
Last edited:





Back
Top