Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,

The Scorcher A has been sold !!
That leaves The Scorcher B, The Scorcher Jr., The copper Scorcher and the MX900 RT build and C8 RT build. Will post pics of the others as time permits.

cheers,
Moe
 





Re: The Scorcher & The Scorcher Jr. 445nm 3w+ w/strobe

Greetings,

Both of The Scorcher's have been sold !! :thanks:

Available builds are The Scorcher Jr., The Copper Scorcher, and an RT MX900 build using Rick's first heatsink. The Scorcher Jr. has pics and power output already posted. While there is a pic of The Copper Scorcher and it's output I will post a separate message with some better pics.

Thanks again to all who have shown interest and a special thanks to those who have purchased my builds and to the LPF admins !!! :thanks:


cheers,
Moe
 
Last edited:
Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,

Thought I would try to make a video of switching The Scorcher from a laser to a flashlight and back again. It is poor quality as my camera is not very good, but I tried to show how easy it is to switch it.


I know it is not very good but hopefully it is good enough to show how to switch it.

cheers,
Moe
 
The Copper Scorcher 445nm 2.8w+ w/strobe

UPDATE: The Copper Scorcher has been SOLD !!


Greetings,

This build uses a copper heatsink from Rick Trent, 9mm diode from DTR which is pressed into the heatsink. The lens is an extracted G9 from the 9mm diode. As with all the MX900 builds batteries are 2x26650 or 2x18650 with included adapter sleeves. The duty cycle is 2 minutes. The asking price for this build is $185 not including shipping.

PICT0392_zpsbc5edfe4.jpg


PICT0398_zps2d7a2213.jpg


PICT0395_zps9d0397db.jpg


PICT0399_zps26cc7feb.jpg


PICT0403_zpsc541017c.jpg


PICT0401_zps9a0f0ca9.jpg


TheCopperScorcher_zps19c23c51.jpg



cheers,
Moe
 
Last edited:
Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

UPDATE: This build has been sold !!
Greetings,


This laser is a Rick Trent MX900 build using the first type of heatsink he was using. Was bought as a 3.5w and has almost no runtime on it. Here are some pic's...

PICT0404_zps98e1e684.jpg


PICT0406_zps1c0d2692.jpg


PICT0411_zps19df800c.jpg


PICT0408_zps6605d779.jpg


PICT0412_zps88992426.jpg


PICT0417_zps5768a72d.jpg


RTMX900_zpsc7119fcf.jpg


UPDATE: This build has been sold !!

The asking price of this build is $200, and does include shipping.

cheers,
Moe
 
Last edited:
Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Wow nice pics 3.4W thats insane good luck with sale!
 
Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

:bumpit:


cheers,
Moe
 
The Scorcher & The Scorcher Jr. Duty Cycle

Greetings,

Check out the duty cycle on The Scorcher when @ 50% power !! This is an older build with peak output @100%, 2.9w. Normal builds average 3.1w and higher.
As you can see the output is pretty constant at 1400mw with very little instability. Tests were done using a LaserBee 3.7w USB LPM @73 degrees, the build using 2 fully charged Panasonic NCR18650A batteries. After 10 minutes the build was slightly warmer then room temp, so when @50% power it is basically continuous..... :drool:

TheScorcherdutycycle50_zpseab9cc82.jpg


Currently available builds are The Copper Scorcher, The Scorcher Jr. and one of the first RT MX900 builds. Should have more Scorcher's available as soon as I get the heatsinks from Mrcrouse.
I am also working on a few 808nm builds that should be 3w or higher. Those will be some time before they are finished.


cheers,
Moe
 
Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

I got mine and i love it, will post pics and a mini review this weekend time permitting. I would recommend this to anyone who is looking to get a beefy blue beast, it definitely fills that role well.
 
Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Wow nice pics 3.4W thats insane good luck with sale!

Greetings,

Thanks, and hopefully will get a better camera as the pic's are a little blurry.

I got mine and i love it, will post pics and a mini review this weekend time permitting. I would recommend this to anyone who is looking to get a beefy blue beast, it definitely fills that role well.

Greetings,

I am looking forward to seeing your pic's and reading your review. I am sure your camera has to be better than mine.
Personally I think a 3w+ laser needs to be big enough to provide adequate battery and of course heatsink. Too many use a single battery or 2x16340 or as small a battery, and with 3w+ of power you need a good power source. Just having room for a good power source normally means enough room for a good heatsink as well.

cheers,
Moe
 
Re: The Scorcher & The Scorcher Jr. 445nm 3w+ w/strobe

:bumpit:


cheers,
Moe
 
Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,

The Copper Scorcher has been sold !! :thanks:

Current available builds are the RT MX900 with Rick's first style of heatsink, and a Scorcher Jr. Both builds are 3w and have pic's and LPM chart shown earlier in the thread.
Should have more Scorcher's available over the next couple weeks !!

cheers,
Moe
 
Last edited:
Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Incoming PM. Hope these are still available. I will take one for sure.
 
Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,

Will have 4 more Scorcher's available today !! All four have aluminum heatsink and focus adapter made by Mrcrouse and are just gorgeous !!
The diodes are 9mm unused pulled from a new projector by Rick Trent and are fully copper jacketed and arctic silvered for better heat transfer. The lenses are the G9 also pulled from the diode. Will post pics and power readings when all builds are finished.

Here's a pic of the copper module and heatsink;

PICT0424_zps63c78763.jpg


cheers,
Moe
 
Last edited:
The Scorcher's, 3w+ w/strobe

Greetings,

As promised here are pic's of the new Scorcher's....

PICT0425_zps1b4766c2.jpg


PICT0427_zps12b94628.jpg


PICT0430_zps633efbaa.jpg


PICT0428_zps65aa9232.jpg


PICT0431_zps4edc125a.jpg


PICT0429_zps939ffafd.jpg


PICT0433_zps40fc41e9.jpg


PICT0435_zps2614f354.jpg


PICT0434_zps2a44fadb.jpg


PICT0432_zpsb73035d9.jpg


PICT0437_zps1b7e9a62.jpg


PICT0438_zpscd78b9e1.jpg


PICT0443_zps27e39cfe.jpg


PICT0441_zps5487c23a.jpg


PICT0439_zpsb96e78cc.jpg


PICT0442_zps9d296d09.jpg


I must say Mrcrouse did a phenomenal job on the heatsinks and focus adapters as these are the best looking builds thus far. I will post individual pics for each build as well as a pic of it's power output.
Asking price for each build is $235 not including shipping and paypal fees.
I still have a Scorcher Jr. and an MX900 Rick Trent build both of which are $200 not including shipping and paypal fees.

cheers,
Moe
 
The Scorcher's, 450nm 3.1w+ w/strobe

UPDATE: This build has been sold !!

Greetings,

Here are some pic's of the first of my latest builds, The New Scorcher A. This build uses a 9mm 450nm diode pulled from a new unused projector. Has the G9 lens extracted from the diode with the focus adapter and heatsink by Mrcrouse. Uses 2x18650 with included adapter sleeves or 2x26650 batteries. Power output peaks over 3.1w running solid at 3w+. The duty cycle is 2 minutes.

PICT0471_zps89ca63e6.jpg


PICT0470_zpse49b6521.jpg


PICT0469_zps54234fb5.jpg


PICT0435_zps2614f354.jpg


PICT0473_zps245bb221.jpg


PICT0472_zps262ca0ea.jpg


PICT0478_zps30a280f2.jpg


PICT0476_zps8ef62d05.jpg


PICT0477_zps0a4cc71a.jpg


PICT0479_zps6d7b7638.jpg


TheNewScorcherA_zpsb4bd2ef0.jpg


UPDATE: This build has been sold !!

The asking price for this build is $235 and does not include shipping and paypal fees. YOU will also need appropriate wavelength safety glasses, batteries and charger. I do not believe in including the el-cheapo ones that are bundled with most lasers.
It is important you take proper safety precautions and get good quality gear. Will be glad to help if you need it.


cheers,
Moe
 
Last edited:





Back
Top