Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Sale thread/ Hosts/Heat Sinks/Focus adapters/lasers

Joined
Jun 14, 2017
Messages
452
Points
63
Wow! That’s a really good price for that unit, Rich!!
If the effing typhoons would cease for a minute, your host might be here soon 😫
SGD🍻
 





Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi LPF,
Just made this for a customer with a NUBM44/ 4.5A SXD sinked on a milled shelf/G2
Rich :)
 

Attachments

  • fullsizeoutput_918.jpeg
    fullsizeoutput_918.jpeg
    150.9 KB · Views: 20
  • fullsizeoutput_917.jpeg
    fullsizeoutput_917.jpeg
    151.2 KB · Views: 20
  • fullsizeoutput_916.jpeg
    fullsizeoutput_916.jpeg
    151.9 KB · Views: 17
  • fullsizeoutput_914.jpeg
    fullsizeoutput_914.jpeg
    147.2 KB · Views: 23
  • fullsizeoutput_919.jpeg
    fullsizeoutput_919.jpeg
    91.6 KB · Views: 25
Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi SGD,
Just had one today you read my mind buddy I am savoring that good stuff . Thanks for the bump pal..Awesome..

Rich:)
 
Joined
Sep 20, 2013
Messages
17,253
Points
113
Yes, Rich is still making and selling hosts. He also has some 501B hosts that are great for powers up to 1.5 watts. Check out the photos in his signature.
 
Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi LPF,
Here is a nice small host with a CU sink and a Brass focus adapter prewired for 1X18650 battery. This will fit a full 12mm module with the AL back half.
Rich:)fullsizeoutput_940.jpegfullsizeoutput_93d.jpegfullsizeoutput_93e.jpegfullsizeoutput_93f.jpeg
 
Joined
Jun 14, 2017
Messages
452
Points
63
That’s a neat lil host Rich! You ought to use that for the GGW 650 I traded to ya😉. I’m still waitn to see ya fire that one up.
I’m flying back from Tokyo today and this week I’ll get the host in the mail👌
SGD🍻
 
Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi LPF,
here is a heat sink with fan that runs off 2 X 9V batteries , works great for testing diodes to LPM keeping them cool.
Asking 40.00 + shipping
Thanks for looking folks..

Rich:)IMG_3356.JPGIMG_3358.JPGfullsizeoutput_900.jpegfullsizeoutput_901.jpegfullsizeoutput_903.jpeg
 
  • Like
Reactions: GSS
Joined
Jun 6, 2014
Messages
435
Points
43
back in February i bought this 900w 635nm laser in a red 501b host from Rich. well its been a while since iv used it and i somehow forgot if its a single 18650 or 2 18350s ? my memory sucks. I am actually looking to sell a few of my lasers because im trying to save for the new Nikon P1000 camera. IMG_20181025_222659 by Alex Littig, on Flickr
 
Joined
Sep 20, 2013
Messages
17,253
Points
113
You can always try an 18650 first to see if it doesn't need 8 volts to run. Mine uses a buck driver that would take either battery options. The Vf of these diodes is very low, so it isn't using a boost driver.
 
Joined
Jun 6, 2014
Messages
435
Points
43
You can always try an 18650 first to see if it doesn't need 8 volts to run. Mine uses a buck driver that would take either battery options. The Vf of these diodes is very low, so it isn't using a boost driver.
I tried an 18650 and it turns on but it's only like 40 mw
 
Joined
Sep 20, 2013
Messages
17,253
Points
113
Are you sure the battery is still good and fully charged? If it uses a buck driver that should be enough voltage to run it if the battery is good and fully charged.
 
Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi Alex,
Ok take out the lens and see if it has a can . If it does its a Oclaro 700 and if it doesn't and its a open can its a Mitsubishi 500
Those are the only two 638's I use.

Rich:)
 




Top