Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Presale: "Just Add Diode" Kits

We've got more than enough now.
I'm going to collect payment in a day or two.
The store should be back from chinese new year on the 29th, and I want to get payment to them as soon as possible to get the hosts here.
 





Hi
I am new around here been lurking around for a while just joined the other day and have a couple of lasers built in the basement. I would like one of your kits if it is not to late.
 
Last edited:
Moh, I'm new to building. I assume we need to give you a current? Do you have any easy guidelines? Also, I assume 405s and 445s are good, what else works in these kits? Thanks for any help you can offer a noob builder.

:-)

ts
 
tsteele93 said:
Moh, I'm new to building. I assume we need to give you a current? Do you have any easy guidelines? Also, I assume 405s and 445s are good, what else works in these kits? Thanks for any help you can offer a noob builder.

:-)

ts
Click to expand...

pretty much any diode can be used in this kit, as long as it's a 5.6mm diode.

I do have to have the current, which i'll collect and include on the invoice when i collect the payments.
 
What are the possible ranges and is there a place I can easily estimate what I should get? Or should I just go HIGH and look for diodes to match?

Sorry to be a pest.

ts
 
go to mohgasm.com
look at any of the drivers. there is a drop down box that shows current options. These are available in the same current options.
 
So, what kind of mW should we expect to see from x.xx mA? Is there a simple chart or is it different for each diode. I apologize for my ignorance, I'm trying to learn as fast as I can!

ts
 
According to this thread it might put out 1.8W when driven at 1.62A with DTR's 445 and a G2 lens.

http://laserpointerforums.com/f65/my-new-445-aurora-c6-host-69570.html

My current kit from Moh is at 1.62A with DTR's 445 and a G2. When my LaserBee LPM gets here I'll meter it.

Lights red matches instantly from about six feet without much fussing with the focus (and with the standard, non-G2 lens) and on non-fully charged AW 3.7V ICR 123's at 750mAh.

1.8A may be a little hot, but I am not experienced enough to opine definitively. Might add a copper heat sink to mine just for grins.

Glenn
 
Last edited:
I'm thinking that I got in over my head a little. I was thinking that I would be able to get some quick education on some typical mA settings for typical builds.

I'm thinking that I want to do a 445 single mode, a 405 and maybe a 640-660 and do them all as hot as possible, but I'm assuming red is much harder to find a diode that will run 500 mW than a 405 and I think single mode blue is also hard. I may have to just order a 1.8 1.0 and .625 or something like that and see what I end up matched with.

Or maybe I should order them all 1.8 and just build some burners and sell them!

Heck, I don't know. I'm gonna have to make up my mind soon though. Anyone buying here with any tips?

I don't think Moh wants to deal with an annoying noob on these. :crackup:

ts


GAtkins said:
According to this thread it might put out 1.8W when driven at 1.62A with DTR's 445 and a G2 lens.

http://laserpointerforums.com/f65/my-new-445-aurora-c6-host-69570.html

My current kit from Moh is at 1.62A with DTR's 445 and a G2. When my LaserBee LPM gets here I'll meter it.

Lights red matches instantly from about six feet without much fussing with the focus (and with the standard, non-G2 lens) and on non-fully charged AW 3.7V ICR 123's at 750mAh.

1.8A may be a little hot, but I am not experienced enough to opine definitively. Might add a copper heat sink to mine just for grins.

Glenn
Click to expand...
 
got it :D

I'm assuming the chinese return today as it is 5:30am Jan 29th their local time.

i'm sending him another e-mail to bug him in case he is flooded with requests...surely he will see the masses of emails i've sent.
I want to get the order in tonight and ask him to get it sent ASAP. I think last time it took about a week from the time i ordered to it showing up at my door.

They will be shipped either DHL or FedEx Express.
I don't want hong kong post touching it, or it'll end up in a customs container for a month
 
Last edited:
You must log in or register to reply here.


Back
Top