Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Plug N Play hosts for sale..

Lifetime17

Lifetime17

0
Joined
Dec 15, 2014
Messages
6,773
Points
113
Hi Folks here are a few plug n play hosts for sale with custom heat sinks and focus knobs.. If you need serious heat sinking well these will do the job for you.
They have a 4-40 set screw and are prewired ready to go. Thanks for looking any questions PM me ...If the one you want is sold i can make another one. just to mention i sell the heat sinks and focus knobs separate just need the size you want..

The XM900 is SOLD.... Thank you..:sold:
C8 with gold band SOLD ... Thank you :sold:
C6 extended aluminum sink ..SOLD..
Camo C8 Aluminum Sink...SOLD..
Rich:)
 

Attachments

  • IMG_2339.JPG
    IMG_2339.JPG
    206.1 KB · Views: 262
  • IMG_2340.JPG
    IMG_2340.JPG
    187.5 KB · Views: 187
  • IMG_2341.JPG
    IMG_2341.JPG
    210.3 KB · Views: 195
  • IMG_2343.JPG
    IMG_2343.JPG
    204.9 KB · Views: 315
  • IMG_2342.JPG
    IMG_2342.JPG
    172.5 KB · Views: 156
  • IMG_2345.JPG
    IMG_2345.JPG
    162.3 KB · Views: 146
  • IMG_2344.JPG
    IMG_2344.JPG
    166.2 KB · Views: 133
Last edited:





Hi EL,
It all depends what build folks would like. They take a long time to machine i'm talking hours , i won't just turn out a piece unless its perfect. Taking in consideration the time and material . Its cutting ,turning, boring, tapping, finishing with different tooling , then more finishing 150,220,320,400 grit and finally extra fine steel wool. Then onto the buffer with 3 different rouge.then a jewelers rag at the end. So now you know what it takes to make these .. Measurements are critical and have to follow steps to get there. hey thanks for looking my friend,,

Rich:)
 
Lifetime17 said:
Hi EL,
It all depends what build folks would like. They take a long time to machine i'm talking hours , i won't just turn out a piece unless its perfect. Taking in consideration the time and material . Its cutting ,turning, boring, tapping, finishing with different tooling , then more finishing 150,220,320,400 grit and finally extra fine steel wool. Then onto the buffer with 3 different rouge.then a jewelers rag at the end. So now you know what it takes to make these .. Measurements are critical and have to follow steps to get there. hey thanks for looking my friend,,

Rich:)
Click to expand...

Yep, that process is no stranger to me :beer: I'd recommend going to 1000 grit or even 1500 grit while you've got the vac on though, it makes for a bit of a nicer and deeper shine. Thanks for the reply! :D
 
Hi,
Ill give it a shot and it all depends on the AL your using also that is made all different to get a fine finish..

Rich:)
 
Last edited:
Can these be used with external drivers or does it need to be in the 12mm module? Also could you list the hosts in the pics? :D
 
Lifetime looks like some great work! What do you mean when you say they are " pre wired "?
 
Hi ,
And just added a new edition an SL extended sink for S4 or S4X hosts..

Thank for peeking Rich:)
 

Attachments

  • IMG_2346.JPG
    IMG_2346.JPG
    157.9 KB · Views: 114
  • IMG_2347.JPG
    IMG_2347.JPG
    182.1 KB · Views: 99
Sending a pm about the one 2nd from the right. The one with the side switch:D
 
BobMc said:
Lifetime looks like some great work! What do you mean when you say they are " pre wired "?
Click to expand...

Pretty sure it means they are ready for a DTR 12mm module. Just gotta solder the wires together and set it in:p
 
It might be better if you could price each host so everyone would know without having to ask on each individual one. Once you get better at these, it should go much faster. It's always nice to have a new host supplier in the forum. :D
 
Lildutchboy7 said:
Pretty sure it means they are ready for a DTR 12mm module. Just gotta solder the wires together and set it in:p
Click to expand...

I'm confused, if it means ready for dtr module what amps are they set at and what driver are they using ,so I'm not sure if that is what is meant?
 
BobMc said:
I'm confused, if it means ready for dtr module what amps are they set at and what driver are they using ,so I'm not sure if that is what is meant?
Click to expand...

Dtr has an option for the whole module to be prebuilt with lead wires and everything. It has the driver already attached to the driver and the driver has lead wires out the bottom. So all you have to do is solder the neg and pos ends to the ones in the host and your laser is set to go:)

Look at this one, the first option on the right hand side:
https://sites.google.com/site/dtrlpf/home/diodes/ndg-700mw-520nm-laser-diode

NDG700 700mW 520nm Laser Diode
In 12mm Copper Module
W/SXD Driver
6.5-12V 2A+ Input
$190

The whole module is ready to go, it just needs to be soldered to the host and set inside:)
 
Last edited:
Lildutchboy7 said:
Dtr has an option for the whole module to be prebuilt with lead wires and everything. It has the driver already attached to the driver and the driver has lead wires out the bottom. So all you have to do is solder the neg and pos ends to the ones in the host and your laser is set to go:)

Look at this one, the first option on the right hand side:
https://sites.google.com/site/dtrlpf/home/diodes/ndg-700mw-520nm-laser-diode

NDG700 700mW 520nm Laser Diode
In 12mm Copper Module
W/SXD Driver
6.5-12V 2A+ Input
$190

The whole module is ready to go, it just needs to be soldered to the host and set inside:)
Click to expand...
I gotcha! Not so confused anymore . Thanks
 
You must log in or register to reply here.





Back
Top