Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

OK? on my first build?

the shorter duty cycle and longer cool off period will translate into longer laser life but like Polonium said, anything that is homemade is hard to tell the exact life of.
 





Got it. I know where to get heatsinks, but where do I get the adhesive? Preferably under 7$...

Edit: found some, which is better, #1 or #2

#1 : http://www.ebay.com/itm/New-Thermal...967?pt=LH_DefaultDomain_0&hash=item19d2ee40ff

#2 : http://www.ebay.com/itm/Arctic-Silv...hermal_Compounds_Supplies&hash=item460d954979

heatsink from cajun laser, got it. Also, if i need to make one of their heatsinks smaller, how do i cut it? or is it possible?

I know #2 is better, but would #1 work for my purposes?

EDIT: WOOP. 12:08 PM wed. march 31. All parts ordered (except for thermal adhesive) SOOO EXCITED! Takes 2 weeks for host to get here tho :(

Edit: last questions. I Pre-ordered the moghasm Cu c6 heatsink. If maghasm gets them in on the 5th, i should get the heatsink when? Same with the driver.

EDIT: CRAP!!! forgot to specify the power on my moghasm driver. I sent them an email, do you guys think they will read it and send me the driver with the correct power???
 
Last edited:
you may have to file down the driver heat sink but yes everything will work. your making a custom laser, modification will be needed as it comes up.

my question is he solders the driver to the retainer ring. is there any part of the driver that needs to be soldered to it or can you just put a blob of solder anywhere on the side of the ring?
 
i solder the side of the ground ring to the pill with a blob it goes anywhere really just make it as neat as possible and try not to overheat anything for too long
 
Last edited:
so you dont need to solder the driver to the ring? soldering it to the pill does the same thing?
 
Yes correct, you only need to solder the outer ring of the driver to the pill.

Re:EDIT: CRAP!!! forgot to specify the power on my moghasm driver. I sent them an email, do you guys think they will read it and send me the driver with the correct power???
 
How do i do that. I sent an email through the moghasm site. Does anyone have his direct email or something>?
 
Make this your friend

rps20130401_121641_zps36a774d0.jpg
 
and if you go under community there is a member section with all the members of the forum, just in case for some reason the search comes up with nothing
 
Livinloud said:
^^ yeah i was going to say, he hasnt found a Cu heat sink in his price range because he hasnt looked. there are PLENTY of Cu heat sinks for right around $10 i got my mohgasm Cu heat sink for $6 in his GB and regular price is $9. if you skip out on upgrading your heat sink then you can plan on owning an operable laser for about 1 month.....in the end the choice is ALWAYS yours but we are here to help you build the best laser possible
Click to expand...

Are you really implying that an M140 at 1.5A will only last one month in a C6 aluminum heatsink?
 
You must log in or register to reply here.


Back
Top