- Joined
- Dec 15, 2014
- Messages
- 6,783
- Points
- 113
Hi, Just through this in a Host that was sitting around . So I decided to put in a NUBMOA diode /G ball . This takes 2X18350's and has a CU core with a SXD heat sinked with a CU sink I milled for it on the IC. Then I decided to fit a 3X BE and wow what a difference in the dot size.From a bar to a nice tight dot, The bar shape with these diodes aren't that bad compared to the 44's . With out the BE it hits about 5800 to 6000. With the BE about 5100/5200.. At 32ft. the dot is tight with the BE nice am happy with this build. Had a little time between a few other jobs in the fire but couldn't resist I had the bank of these diodes sitting for a while. Sure am very happy with this diode it reminds me of the NDB7A75 years ago at DTR's shop, But these have a G ball ,will take the G ball off of one soon to see other results. Beam shots later,
Well sooner than later folks. A few LPM shots ..
Rich
Well sooner than later folks. A few LPM shots ..
Rich
Last edited: