Not FS: My New 'Pocket Mini' Lasers!

[jayrob]

Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or

Thanks Spyder!







mikepesikan, yours will be in tomorrow's mail! (Thursday's)

It's set just a tad higher than we talked about... 118mW / 137mA's.

Please get back to me...
Jay

 

[jayrob]

Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or

Note: I will have a very limited number of 6X sleds available soon!

These diodes will be a $50 dollar upgrade above the normal Pocket Mini price of $190. These 6X blu-ray diodes can be set between 150mW's and 200mW's. I have my personal 6X set at 209mW's. I use it on special occasions. I keep a very conservative duty cycle of 30 sec. on / 30 sec. off.

I do not guarantee diode life. But will rebuild at no charge. You pay for parts and shipping.
Jay

 

[Spyderz20x6]

Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or

I will have a very limited number of 6X sleds available soon!

These builds will be a $50 dollar upgrade. These blu-ray diodes can be set between 150mW's and 200mW's.

I have my personal 6X set at 209mW's. I use it on special occasions. I keep a very conservative duty cycle of 30 sec. on / 30 sec. off.

I do not guarantee diode life. But will rebuild at no charge. You pay for parts and shipping.
Jay

6x??? :-?
How do you get 6x diodes for $40? You mean 4x? :

 

[jayrob]

Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or

Yes, 6X - Not $40 dollars...

The upgrade price is $50 dollars above the normal Pocket Mini price.

I will only have 5 available. Hopefully, these will become more abundantly available in the not too distant future...
Jay

 

[Spyderz20x6]

Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or

Yes, 6X - Not $40 dollars...

The upgrade price is $50 dollars above the normal Pocket Mini price.

I will only have 5 available. Hopefully, these will become more abundantly available in the not too distant future...
Jay

Did you pull them out of 6x Burners?

 

[jayrob]

Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or

I'm getting only a few sleds through a friend. You may see a couple here and there...

These are not available for GB yet. But we all know that soon they will be!
Jay

 

[jake21]

Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or

hey i got some from a friend to

 

[jayrob]

Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or

Another Pocket Mini hitting the Post Office on Monday...

This one is yours Steven!

Set at 120mW's per your request. I found a very efficient diode for you. Running at 128mA's.

Instruction sheet and safety recommendations included. Please let me know when you get it...
Jay

 

[jayrob]

Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or

mksak, yours is getting shipped tomorrow! (Tuesday)

Set at 80mW's per your request... The diode should have a long life at this setting.

Your not going to believe this, but this 80mW blu-ray is just as bright visually as my 150mW 803T build! It is one of the longer wavelength diodes. (seems like this happens often when I set the power lower)

Let me explain how I test this. No fancy equipment or anything... I shine the lasers side by side in the dark, at the ceiling. (30' distance)

I can then see how much reflection bounces off of the ceiling and hits the adjacent wall. You can see the brightness in the reflection. This seems to be a good way to compare visual brightness. (IMO)

Anyway, even though it is set at only 80mW's, it is a SCHWEET blu-ray! Let me know when you get it...
Jay

 

[hevnsnt]

Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or

So I ordered a few of these hosts from DX, and I SIMPLY CANNOT BELIEVE how small they are.. I am jealous of all you with these!

 

[SenKat_Stonetek]

Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or

Greg, it's a beauty!

It's a very efficient diode putting out 115mW's at only 121mA's. I am sending it with no battery per our agreement.

It will be in Monday's mail. Don't forget to remove the dust cap!
Jay

Jay - I will do a much more in depth review shortly after Christmas - suffice it to say, that you have COMPLETELY blown me away ! WOW - even my wife likes this one I gotta hand it to you, the extra care you put into crafting your lasers is definitely worth it - I highly recommend getting one of these beauties off of Jay - they are works of art !

Thanks for making this for me - I absolutely love it, and I promise I will stop using it long enough to snap some photos soon !

 

[jayrob]

Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or

hevnsnt, your heatsinks should be there soon... Let me know how the building goes!






Greg, thanks for that great testimonial!

That's music to my eyes...

Looking forward to some of your pictures that you get with your awesome new camera!
Jay

 

[jayrob]

Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or

drgrant1, I'm shipping your Pocket Mini blu-ray build tomorrow! (Friday)

It's a high efficiency diode set at 128mA's and putting out 118mW's through the AixiZ acrylic lens.

You guys like the new black labels?
Jay

 

[hevnsnt]

Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or

Heatsinks came today -- NICE WORK!!!

I am heading to the machine shop tomorrow -- tried it with a hand drill first, and you are right, def need a lathe!

 

[jayrob]

Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or

Yeah... if your are going to use a 5/8" drill bit, then you must have a lathe. But you could do the job by grinding it out with a Dremel tool!

Just don't shorten the overall length...
Jay

 

[jeffconlaserbot]

Re: FS: My New 'Pocket Mini' Lasers! - Blu-Ray or

just got mine on tuesday! this thing is intense! super bright.. very heavy.. and just all around amazingly good quality.. im very impressed! thank you so much!
jos