Garoq
0
- Joined
- Aug 27, 2010
- Messages
- 1,525
- Points
- 83
Just a quick update that we have added a few new items to the SL stores.
First, we have included a 1.1A to 1.8A current range option for our popular Survival Laser Adjustable Current Driver. The SD-3 driver is now sold in three output current ranges (approximately 400mA to 1.1A, 1.1A to 1.8A, and 1.7 to 3.0A at a maximum output voltage of 6 volts), and the current can be continuously adjusted by the user within these ranges.
Next, we have listed the brass ring that is normally sold in combination with the various pill styles, as a separate product. This ring is designed for 16.8mm diameter driver boards and will fit all the pills used in the C6, S4, S4X and SL stainless steel hosts.
Third, we are now offering a limited edition 1,000 lumen 5-mode flashlight using the high-performance Cree XM-L T6 emitter in our popular larger S4X host. Modes are high, medium, low, strobe and SOS. Emitter is rated at 1,200 lumens; flashlight rating is 900-1,050 lumens (manufacturer estimates on high mode). Uses a single 3.7 volt 18650 battery (only). Includes a dummy 18650 battery. Estimated total run time in high mode is 1 hour. Fits the S4X holster, P/N SL-LH2. Weight: 15-1/2 oz (440 grams)
In separate but related news, the SL stainless host has been out of stock but we are currently sourcing an alternate supplier and hope to have them back in stock within a month or so.
As always, we appreciate your support and patronage over the past 6 years!
First, we have included a 1.1A to 1.8A current range option for our popular Survival Laser Adjustable Current Driver. The SD-3 driver is now sold in three output current ranges (approximately 400mA to 1.1A, 1.1A to 1.8A, and 1.7 to 3.0A at a maximum output voltage of 6 volts), and the current can be continuously adjusted by the user within these ranges.
Next, we have listed the brass ring that is normally sold in combination with the various pill styles, as a separate product. This ring is designed for 16.8mm diameter driver boards and will fit all the pills used in the C6, S4, S4X and SL stainless steel hosts.
Third, we are now offering a limited edition 1,000 lumen 5-mode flashlight using the high-performance Cree XM-L T6 emitter in our popular larger S4X host. Modes are high, medium, low, strobe and SOS. Emitter is rated at 1,200 lumens; flashlight rating is 900-1,050 lumens (manufacturer estimates on high mode). Uses a single 3.7 volt 18650 battery (only). Includes a dummy 18650 battery. Estimated total run time in high mode is 1 hour. Fits the S4X holster, P/N SL-LH2. Weight: 15-1/2 oz (440 grams)
In separate but related news, the SL stainless host has been out of stock but we are currently sourcing an alternate supplier and hope to have them back in stock within a month or so.
As always, we appreciate your support and patronage over the past 6 years!
Last edited:
