Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Laser Pointer Store

NDG7475 Pen beam shot

Joined
Aug 17, 2018
Messages
41
Likes
17
Points
8
Hello guys

This is my NDG7475 Pen Build.
output : with G-2 lens 930mw maybe...














Gold and White pen is beautiful :na:
:lasergun: i love 515nm color. :crackup:
 

Attachments


BobMc

Well-known member
Joined
Apr 23, 2016
Messages
3,798
Likes
883
Points
113
Man that thing is bright. There doesn’t look like there’s a star in the sky. :drool:

+ reps
 
Last edited:

Nexgen

Active member
Joined
Nov 11, 2016
Messages
309
Likes
192
Points
43
Man... isn’t that host too small for such diode at that current? What duty cycle it has?
 
Joined
Aug 17, 2018
Messages
41
Likes
17
Points
8
Duty cycle? If i set 1.3w with G-2 lens. 5s right
My pen NDG7475 is 10s :D
 

paul1598419

Well-known member
Joined
Sep 20, 2013
Messages
14,213
Likes
2,213
Points
113
That pen has no heat sink. I suspect what is called an NDG7475 is actually an NDG700. They look identical, but there is a great difference in power. I would remove the module and driver and put it in a proper host with a heat sink. Some diodes were never meant to be in pens. The NDG700 and the NUBM44 come to mind.
 
Joined
Aug 17, 2018
Messages
41
Likes
17
Points
8
It knows. NDG7475 NDG700 This is similar in appearance. my NDG7475 diode is from Techhood China..

My friend has a meter and power supply. No problem :D. and Settings below 1.8 amps are safe for my pen build
 

paul1598419

Well-known member
Joined
Sep 20, 2013
Messages
14,213
Likes
2,213
Points
113
These diodes aren't very efficient. They have a high Vf compared to the reds and blues. For this reason, they tend to get hotter faster than the others. I would keep your run times short in that pen.
 
Joined
Aug 17, 2018
Messages
41
Likes
17
Points
8
i know it It does not exceed the setting value of 1.4A everything is fine :p. however if i change this driver to X-driver 1.8A or SXD 2A. The fever becomes serious
 

paul1598419

Well-known member
Joined
Sep 20, 2013
Messages
14,213
Likes
2,213
Points
113
I've got one I am putting into an MS-SSW-II host from sinner. DTR made the same laser back when these diodes first came out. I will post a thread on it when it is done. I'm thinking of setting mine to 2 amps. The host takes two 26650 batteries.
 
Last edited:
Joined
Aug 17, 2018
Messages
41
Likes
17
Points
8
SXD 2.4A 26650 or 18650 2pcs is good for NDG7475. Max output with G-2 1.4W right? :p
 

paul1598419

Well-known member
Joined
Sep 20, 2013
Messages
14,213
Likes
2,213
Points
113
Yes, but 2.4 amps is pushing that diode pretty hard. It isn't cheap, so you might want to reconsider using that much current on such an expensive diode. It could work out fine or it could fail, that is the chance you'll take.
 




Top