midias
0
- Joined
- Mar 14, 2010
- Messages
- 631
- Points
- 0
hi guys, a quick question, is it ok to connect the tab on the lm317 to the same heatsink than the 445 diode?, I was checking the diode and looks like isulated from the case, is that correct?
quick answer apreciatted, I'm setting up a quick lab for my diode just now, by the way, which driver with modulation and cheap could you recommend for a 7-13v range power?
thanks very much
If the case pin is not connected then yes you can. For modulation you could use a LM317 and a Nfet as a low side switch.