Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Leadlight GLP-105

Joined
Jan 8, 2008
Messages
299
Points
0
Can someone please help me find one of these online? (they have a rubbery button) They seem hard to find. I'm looking for a chrome one to build a blu ray with. I've found a couple, but for like $80. I'm looking for no more than $40.
 





I can't even begin to see the reasoning behind an $80 5 mW. The GLP-110 is $40, and 5 mW, but it has a metal button.
 
well if you can't find anything cheaper just get a x-15 and sell all the parts.(IR filter)
 
Thanks. I'll order the black one. Just what I don't understand, is why the GLP-105 is more expensive than the GLP-110.
 
I know the 105 can be modded easily the 110 is a bit harder  but both are A#1 in my book had mine a couple years no -problems it kinda hurt sending a new 110 to dr lava for va blu-build  :( but somtimes you have to give to get  ;)


Both 105 and 110 have a plastic button if its metal or rubber it may be a fake or copy
 
I thought the 110 was metal and the 105 was rubber? Isnt it easily moddable because you can take the rubber button off so easily? Oh, and i could swear that the Wicked Lasers Core is just a glp-105. look closely at the giant ad on the top and compare it to a leadlight. it just has no clip. http://www.laserpointer.com/?main_page=products_all
 
the button looks like rubber but its plastic with two sided tape and I have also heard that a core is a leadlight copy leadlights are soo nice
 
Your looking for the first version of the leadlight. Vital_spirit on ebay sells them. they are the one's that folks were modifying with the basic pot mod and don't have the led indicator.
 
Kenom said:
Your looking for the first version of the leadlight. Vital_spirit on ebay sells them. they are the one's that folks were modifying with the basic pot mod and don't have the led indicator.

Is that their eBay user name?

Peace,
dave
 
it should be noted however that the 105 does NOT have a rubber button. it's plastic. and can be very easily lifted off since it's just glued on top of another plastic bob. Remove that and you can drill open the plastic to do the pot mod without removing anything at all from the laser.
 
Hey ken the 105's I have purchased before from vital spirit before they went to newish already had a hole underneath button only 110's don't have the hole drilled leadlights manufactured at or around 2006 i have bought 10-14 units from them all already had hole drilled but the 110's none had holed drilled
 


Back
Top