ragebot
0
- Joined
- Jul 29, 2018
- Messages
- 55
- Points
- 8
I have a JL PL-E Pro. I am also an amateur lock picker. There seems to be some type of tubular lock on the tail cap of my PL-E; but it is a non standard size which is 7.8mm, or less common 7.5 or 7.0. Most common pin configurations are 7 pin or 8 pin; but the JL lock does not have any visible pins.
The standard rule of thumb is to never pick a lock that is in use and I have no plans to try and pick the tubular lock on the back of my JL PL-E. But when I posted a pix of the lock at the lockpicking forum I am a member of posters there were very interested in the type of lock used.
Can anyone answer the question of what type of lock is on the tail cap of JL lasers.
As an aside if someone showed a pix of a laser beam that was orange with green polka dots there would be multiple questions about it; it is the same with lock pickers that see a lock they have never seen before.
The standard rule of thumb is to never pick a lock that is in use and I have no plans to try and pick the tubular lock on the back of my JL PL-E. But when I posted a pix of the lock at the lockpicking forum I am a member of posters there were very interested in the type of lock used.
Can anyone answer the question of what type of lock is on the tail cap of JL lasers.
As an aside if someone showed a pix of a laser beam that was orange with green polka dots there would be multiple questions about it; it is the same with lock pickers that see a lock they have never seen before.