- Joined
- Feb 29, 2008
- Messages
- 2,344
- Points
- 0
Re: 6x Blu-ray SLEDS GB! GET EM WHILE THEY LAST
i have paid - but what would be a good current in a kryton barrel
i have paid - but what would be a good current in a kryton barrel
Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
Buy Site Supporter Role (remove some ads) | LPF Donations
Links below open in new window
FrozenGate by Avery
GGW-H20L 6x Sled GB!!! THE EPIC GB THREAD LAWL!!!
- Thread starter amkdeath
- Start date
- Joined
- Feb 23, 2008
- Messages
- 2,832
- Points
- 48
Re: 6x Blu-ray SLEDS GB! GET EM WHILE THEY LAST
you can add me to the paid list now
you can add me to the paid list now
brtaman
0
- Joined
- Jun 12, 2008
- Messages
- 1,199
- Points
- 48
Re: 6x Blu-ray SLEDS GB! GET EM WHILE THEY LAST
hey dan,
Up to now the "safe" current with adequate heastinking is in the area of 200ma. This does not mean that these diodes cannot go higher. Everyone who actually bought a 6x blu-ray burner payed a large sum of money for the diode and were understandably reluctant to push it to the limit and determine a maximum current. I have a feeling that this will soon change with the diodes coming into a reasonable price range loosing one would be nowhere near as disastrous as loosing one in the past.
I am hoping they will be reliable in the 250+ma area, because in theory this combined with Igor's lenses, we might/will/should/hopefully start seeing 300mw blu-ray builds popping up :O
brtaman
hey dan,
Up to now the "safe" current with adequate heastinking is in the area of 200ma. This does not mean that these diodes cannot go higher. Everyone who actually bought a 6x blu-ray burner payed a large sum of money for the diode and were understandably reluctant to push it to the limit and determine a maximum current. I have a feeling that this will soon change with the diodes coming into a reasonable price range loosing one would be nowhere near as disastrous as loosing one in the past.
I am hoping they will be reliable in the 250+ma area, because in theory this combined with Igor's lenses, we might/will/should/hopefully start seeing 300mw blu-ray builds popping up :O
brtaman
IgorT
0
- Joined
- Oct 24, 2007
- Messages
- 4,177
- Points
- 0
Re: 6x Blu-ray SLEDS GB! GET EM WHILE THEY LAST
We are overdriving the poor PHRs by up to four times their rated power.. But i kinda doubt the 6x will be able to handle 3x it's rated power.. I fear mine is degrading even at 2x it's rated power.
The lens will reduce the strain on the diode, so a higher current will be just as safe as a lower current with an uncoated lens. But.. Oh well. We'll find out soon enough, i guess...
We are overdriving the poor PHRs by up to four times their rated power.. But i kinda doubt the 6x will be able to handle 3x it's rated power.. I fear mine is degrading even at 2x it's rated power.
The lens will reduce the strain on the diode, so a higher current will be just as safe as a lower current with an uncoated lens. But.. Oh well. We'll find out soon enough, i guess...
- Joined
- Feb 29, 2008
- Messages
- 2,344
- Points
- 0
Re: 6x Blu-ray SLEDS GB! GET EM WHILE THEY LAST
What is the rated power igor?
IgorT said:We are overdriving the poor PHRs by up to four times their rated power.. But i kinda doubt the 6x will be able to handle 3x it's rated power.. I fear mine is degrading even at 2x it's rated power.
The lens will reduce the strain on the diode, so a higher current will be just as safe as a lower current with an uncoated lens. But.. Oh well. We'll find out soon enough, i guess...
What is the rated power igor?
- Joined
- May 7, 2008
- Messages
- 545
- Points
- 0
Re: 6x Blu-ray SLEDS GB! GET EM WHILE THEY LAST
hey sorry i jumped so quickly to say i wanted a 6x.... I do have the $$ for one of these but i already have a 6x diode... that i payed $190 dollars for. i dont know what i would do with another one.
thanks though!!!
even if i bought one, i dont think i would feel comfortable selling such a high powered laser to anyone that didnt know anything about lasers.
hey sorry i jumped so quickly to say i wanted a 6x.... I do have the $$ for one of these but i already have a 6x diode... that i payed $190 dollars for. i dont know what i would do with another one.
thanks though!!!
even if i bought one, i dont think i would feel comfortable selling such a high powered laser to anyone that didnt know anything about lasers.
IgorT
0
- Joined
- Oct 24, 2007
- Messages
- 4,177
- Points
- 0
Re: 6x Blu-ray SLEDS GB! GET EM WHILE THEY LAST
Of which one? The PHR or the 6x?
The PHR is believed to be a 60mW Sanyo diode, the 6x is believed to be a 105mW Sharp diode... I have both datasheets somewhere..
Some people say, that the PHR is the Sharp, but that's imposible, cos then they would all be able to reach 210mW, which is the Sharp diode's pulsed rating..
The forward voltages, currents vs. powers and other characteristics seem to match the datasheets... With some imagination you can force the PHR onto the Sharp datashet, but i've been thinking about this for a long time now, and it can't be. It is only 100% reliable and somewhat consistent at low powers, at high powers, they suddenly start exhibiting huge differences among themselves..
So the 6x is a much more likelly Sharp candidate... It is also closer to actually being 405nm.. The PHRs vary much more, just like the Sanyo datahseet suggests.
Keep in mind, we have always been pushing diodes to their pulsed ratings.. Blu rays are built differently and have longer end facets (mirrors), and can withstand more abuse, before commiting COD, whch is one of the reasons we can push them so hard - at least for a while.
But there are other faults, that start accumulating in the die, and eventually lead to COD, it just takes longer. This is something, even the scientists don't fully understand yet and have to make up theories first
(i read this interesting article about 405nm diode degradation)..
robjdixon said:
Of which one? The PHR or the 6x?
The PHR is believed to be a 60mW Sanyo diode, the 6x is believed to be a 105mW Sharp diode... I have both datasheets somewhere..
Some people say, that the PHR is the Sharp, but that's imposible, cos then they would all be able to reach 210mW, which is the Sharp diode's pulsed rating..
The forward voltages, currents vs. powers and other characteristics seem to match the datasheets... With some imagination you can force the PHR onto the Sharp datashet, but i've been thinking about this for a long time now, and it can't be. It is only 100% reliable and somewhat consistent at low powers, at high powers, they suddenly start exhibiting huge differences among themselves..
So the 6x is a much more likelly Sharp candidate... It is also closer to actually being 405nm.. The PHRs vary much more, just like the Sanyo datahseet suggests.
Keep in mind, we have always been pushing diodes to their pulsed ratings.. Blu rays are built differently and have longer end facets (mirrors), and can withstand more abuse, before commiting COD, whch is one of the reasons we can push them so hard - at least for a while.
But there are other faults, that start accumulating in the die, and eventually lead to COD, it just takes longer. This is something, even the scientists don't fully understand yet and have to make up theories first
(i read this interesting article about 405nm diode degradation)..
- Joined
- Feb 29, 2008
- Messages
- 2,344
- Points
- 0
Re: 6x Blu-ray SLEDS GB! GET EM WHILE THEY LAST
Thanks - so 200mA it is for about 200mW then
Thanks - so 200mA it is for about 200mW then
IgorT
0
- Joined
- Oct 24, 2007
- Messages
- 4,177
- Points
- 0
Re: 6x Blu-ray SLEDS GB! GET EM WHILE THEY LAST
About yeah, you can get 200mW at 190-210mA appoximatelly..
Again, like with PHRs, the efficiency will vary, but since these are higher power diodes, the variations are lower, they are more consistent.
My first 6x doesn't have the highest efficiency, and at almost 200mA it's still at "only" 189mW or 185mW when it warms up. But unlike with pushed PHR diodes, which give me almost the same power, or sometimes look as bright at only 120mW, it's a different feeling. I'm not constantly waiting for it to pop, you know..
About yeah, you can get 200mW at 190-210mA appoximatelly..
Again, like with PHRs, the efficiency will vary, but since these are higher power diodes, the variations are lower, they are more consistent.
My first 6x doesn't have the highest efficiency, and at almost 200mA it's still at "only" 189mW or 185mW when it warms up. But unlike with pushed PHR diodes, which give me almost the same power, or sometimes look as bright at only 120mW, it's a different feeling. I'm not constantly waiting for it to pop, you know..
amkdeath
0
- Joined
- Oct 28, 2007
- Messages
- 2,631
- Points
- 48
Re: 6x Blu-ray SLEDS GB! GET EM WHILE THEY LAST
you made a big mistake. Round 1 is all said and done for. You had to wait for round two. Now I have to squeeze you in. Always read the thread and instructions before doing things
_robban said:Member for less than one hour and just paid for one set
you made a big mistake. Round 1 is all said and done for. You had to wait for round two. Now I have to squeeze you in. Always read the thread and instructions before doing things
- Joined
- Jun 25, 2008
- Messages
- 188
- Points
- 0
Re: 6x Blu-ray SLEDS GB! GET EM WHILE THEY LAST
you made a big mistake. Round 1 is all said and done for. You had to wait for round two. Now I have to squeeze you in. Always read the thread and instructions before doing things[/quote]
Good thing I read the entire thread before paying up,..... on the other hand kind of a bummer I missed the party.
I'll be down for at least 1 when you get "Batch 2" up and running,... hopefully they still have some left for another batch.
Thanks!!!
amkdeath said:[quote author=_robban link=1223438970/60#79 date=1223531306]Member for less than one hour and just paid for one set
you made a big mistake. Round 1 is all said and done for. You had to wait for round two. Now I have to squeeze you in. Always read the thread and instructions before doing things[/quote]
Good thing I read the entire thread before paying up,..... on the other hand kind of a bummer I missed the party.
I'll be down for at least 1 when you get "Batch 2" up and running,... hopefully they still have some left for another batch.
Thanks!!!
- Joined
- Feb 18, 2008
- Messages
- 733
- Points
- 18
Re: 6x Blu-ray SLEDS GB! GET EM WHILE THEY LAST
Sorry, I got your PM last night I will pay for round 2 asap.
--hydro15
Sorry, I got your PM last night I will pay for round 2 asap.
--hydro15
amkdeath
0
- Joined
- Oct 28, 2007
- Messages
- 2,631
- Points
- 48
Re: 6x Blu-ray SLEDS GB! GET EM WHILE THEY LAST
gogogo do it now. I put you in round 2. if you hurry I can fit you.
I now must wait for Paypal funds to go to bank account, and then I can order batch 1.
BATCH 2 IS TAKING ORDERS. POST IF YOU WANT IN. DO NOT PAY UNTIL TOLD TO DO SO
hydrogenman15 said:Sorry, I got your PM last night I will pay for round 2 asap.
--hydro15
gogogo do it now. I put you in round 2. if you hurry I can fit you.
I now must wait for Paypal funds to go to bank account, and then I can order batch 1.
BATCH 2 IS TAKING ORDERS. POST IF YOU WANT IN. DO NOT PAY UNTIL TOLD TO DO SO
