Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

GB: 2$ copper modules ALL SIZES CLOSED






Machinist Joe said:
Are we talking internal or external lens springs? Im getting confused by the measurements shown...
Click to expand...

I just took one of the Aixiz internal springs and measured it with a yardstick ;), this is what I got.

0.269 inches / 6.84mm Outer Diameter
0.244 inches / 6.22mm Inner Diameter

0.580 inches / 14.75 mm length (this could change a good bit without causing problems)

0.014 inches / 0.35 mm wire diameter

~0.1 inch / 2.44mm solid height

Which doesn't add up perfectly, but it is probably close enough.
 
tsteele93 said:
I just took one of the Aixiz internal springs and measured it with a yardstick ;), this is what I got.

0.269 inches / 6.84mm Outer Diameter
0.244 inches / 6.22mm Inner Diameter

0.580 inches / 14.75 mm length (this could change a good bit without causing problems)

0.014 inches / 0.35 mm wire diameter

~0.1 inch / 2.44mm solid height

Which doesn't add up perfectly, but it is probably close enough.
Click to expand...


Do you know how many coils? I'll try getting more quotes and they always ask for the coils :p
 
I'm still confused why we are looking for internal lens springs... Am I the only one who thinks they are useless?

I think we should be looking for external ones like the ones sold at SL.
 
Machinist Joe said:
Am I the only one who thinks they are useless?
Click to expand...

Not the only one, I've heard other people say that too. But then the vast majority disagree.

If you don't like lens wobble, and you don't want shards of teflon tape hitting your diode, then internal springs are great. External springs don't always fit a build, and they definitely destroy the aesthetic.
 
rhd said:
If you don't like lens wobble, and you don't want shards of teflon tape hitting your diode, then internal springs are great. External springs don't always fit a build, and they definitely destroy the aesthetic.
Click to expand...

External wouldn't destroy the aesthetic if they were copper. I'm just saying!

:p

Ok, kidding aside, I am ok with either - but I think most folks like internal. Colored external might be neat if it didn't come off.

AnthoT said:
Do you know how many coils? I'll try getting more quotes and they always ask for the coils :p
Click to expand...

Here's a pitcher for ya!


Laser Lens Spring by tsteele93, on Flickr
 
Last edited:
Last edited:
If this turns out good I think you will sell a lot more next time. The online laser part stores will probably buy alot since they will know its legit ;)
 
benmwv said:
If this turns out good I think you will sell a lot more next time. The online laser part stores will probably buy alot since they will know its legit ;)
Click to expand...

yea thats what i was thinking too. thats perfectly fine aswell as this first one turned out to be a huge succes :D so i could just imagine the next
 
You must log in or register to reply here.


Back
Top