Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

New York Skating Lessons | Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

Garbage pail kids

yobresal

yobresal

0
Joined
Nov 5, 2007
Messages
4,919
Points
83
Okay folks, I have 3 of these builds for sale. This is the new style dilda host. It is focusable and runs on 2 rechargeable CR2 batteries (included) Pick your power up to 185mW (you can choose powers higher up to 300mW but I will not replace the diode if/when it dies early)
img04423391717.jpg

Price is $95 shipped with batteries. If you want priority mail shipping just add $5.

ALL SOLD PENDING PAYMENT/CONFIRMATION


I have 1 red laser identical to these. Price for the 200mW red is $40 shipped with batteries. SOLD
 
Last edited:





Re: 6X laser builds $95

I really like the look of that host. Can i ask what driver you are using in them?
 
Re: 6X laser builds $95

Raybo said:
Lens?
Click to expand...

This uses a stock acrylic Aixiz lens. Meaning it has nice beam/spot properties and low price. A 405-G-1 lens is ideal for powers over 200mW but not very cost effective for lasers under 200mW IMHO.

buster7467 said:
I really like the look of that host. Can i ask what driver you are using in them?
Click to expand...

The driver is a Rkctsr driver.
 
Re: 6X laser builds $95

Whats up Yob, If I understand this correctly you have a 6X @ 300mW after an acrylic lens or 405-G-1? If that's acrylic then that diode will die in <30 min.

Just wondering.
 
Re: 6X laser builds $95

IMO it would have to be a H20L there is no way a SF-AW10 could last a decent time at 185mW let alone 300mW.
 
Re: 6X laser builds $95

Grix said:
Is this the GGW or SF-AW?
Click to expand...
This is the SF-AW diode
XCreedX said:
Whats up Yob, If I understand this correctly you have a 6X @ 300mW after an acrylic lens or 405-G-1? If that's acrylic then that diode will die in <30 min.

Just wondering.
Click to expand...
The power output of these is determined by the buyer. I will set it to whatever you would like. If you want to risk it at 300mW be my guest, in no way am I recommending you do so or implying that your laser will survive at that power. In fact I implied the exact opposite. These still use stock acrylic lenses. These are inexpensive lasers for those that want a burning violet but don't want to spend a lot of money. If you want a GGW with a 405-G-1 lens at 240mW you would need to spend much more than this price on parts alone.
 
Re: 6X laser builds $95

So if I understood right this is a violet laser. Would 200mw still be safe, what is your recomandation?
 
Re: 6X laser builds $95

I would go with 175mW. this will give you a nice strong laser and a good lifetime.
 
Re: 6X laser builds $95

I remember when PHR builds under $100 were a steal. :beer: Very nice price!
 
Re: 6X laser builds $95

XCreedX said:
Whats up Yob, If I understand this correctly you have a 6X @ 300mW after an acrylic lens or 405-G-1? If that's acrylic then that diode will die in <30 min.

Just wondering.
Click to expand...

Just tested this out. I set an SF-AW diode at 310-320mW (power rose with time) the laser diode died at 15 minutes of constant on time. Perhaps with duty cycles the diode would not get this hot and it would last a little longer. 300mW is definitely not recommended though. I'm surprised it lasted that long. Kind of exciting to watch a diode die when you are doing it on purpose.
 
Re: 6X laser builds $95

These are all sold pending payment.
I have 1 red laser identical to these. Price for the 200mW red is $40 shipped with batteries. For the two of you who bought these you can add it to your order for $37.
 
Re: 6X laser builds $95

Sure, After modwerx gets more diodes in stock and after I receive payment from these lasers I will order the parts for some more since there seems to be interest in them.
 
You must log in or register to reply here.


Back
Top