FS: (SOLD) FlexDrive - Ver. 3 with 1st Run Kryton

[jayrob]

(SOLD)

Here's your chance to get a brand new FlexDrive (version 3)...

I will sell two of these. But only with the purchase of a 1st run Kryton barrel. I have two of these barrels available.

* 1st run Kryton barrel (with all included pieces) plus version 3 FlexDrive - $75 dollars. (shipping and handling - $6 dollars. This covers my packaging and PayPal fees as well)  

Shipping out of the U.S. will be the same price. But there will be no signature confirmation. (Buyer assumes responsibility at that price) Should not be a problem though...  

If you want the barrel modified for a green module with a heatsink and o-ring for the green build, just let me know. It will be an additional $25 dollars. See here: http://www.laserpointerforums.com/forums/YaBB.pl?num=1233276690/0 (that thread shows a Kryton Groove, but the 1st run Kryton will work the same for a green kit)
Jay

P.S. The drivers are brand new from Dr. Lava. But I will not guarantee this type of item, because it is easy to damage. It can be damaged by powering it without a proper load. Or by turning the pot farther than it is supposed to go. Here is the instruction sheet for the drivers: http://hacylon.case.edu/laser/lavadrive2/Micro_Flex_Drive_User_manual_V3.pdf

 

[daguin]

Re: FS: FlexDrive - Ver. 3 with 1st Run Kryton Bar

Pm sent!

Peace,
dave

 

[The_Muffin_Man]

Re: FS: FlexDrive - Ver. 3 with 1st Run Kryton Bar

Do you still have another barrel or did dave get both of them?

 

[jayrob]

Re: FS: FlexDrive - Ver. 3 with 1st Run Kryton Bar

Dave is too quick...

I'll tell you what, I will let one more FlexDrive/Barrel combination go. But it is a custom Groove barrel. It will be the same deal, except $20 dollars more. Don't hesitate, because I doubt it will last. (I have the rubber already installed in the grooves)

Jay

 

[The_Muffin_Man]

Re: FS: FlexDrive - Ver. 3 with 1st Run Kryton Bar

Thats almost too good to pass up. I will think about it. Gotta get more money :-/

 

[jayrob]

Re: FS: FlexDrive - Ver. 3 with 1st Run Kryton Bar

Ok, but it is first come first serve...

Hey, tell us about your Avatar! It looks like a laser spiro, but I can't imagine one that awesome!
Jay

 

[jayrob]

Re: FS: FlexDrive - Ver. 3 with 1st Run Kryton Bar

Dave got the two smooth barrels...

All that is left is the custom Kryton Groove barrel/FlexDrive combo.

I will be shipping today Dave! (Tuesday)
Jay

 

[jojobos]

Re: FS: FlexDrive - Ver. 3 with 1st Run Kryton Bar

It looks pink purpleish 2-tone to me but how would you describe the finish?

 

[The_Muffin_Man]

Re: FS: FlexDrive - Ver. 3 with 1st Run Kryton Bar

My avatar hmm...

I saw a picture in a long lost post. It was a random post. The original maker of it pmed me about it. He made it with 3 different scanners. And he has like 20 other designs. i didnt know it was his when i made it my avatar. I like YOUR avatar

 

[jayrob]

Re: FS: FlexDrive - Ver. 3 with 1st Run Kryton Bar

Thanks, those are a few pictures I took when I was into Astronomy a while back. I still love it, but just have not been out on an all night'er for a while...







jojobos, it is a custom fade anodized barrel with a clear coat polish I believe. (supposed to be blue to purple) Not sure of how the polishing is done. I would have to ask Kenom, but it is very smooth and shinny, not like my other custom anodized barrel...
Jay

 

[Kenom]

Re: FS: FlexDrive - Ver. 3 with 1st Run Kryton Bar

the finish is a polished anodized surface.  smooth to the touch.  Unlike the non-polished barrels which were rough like sandpaper.well

The polished one's were polished prior to anodizing.

 

[jayrob]

Re: FS: FlexDrive - Ver. 3 with 1st Run Kryton Bar

I see said the blind man...

Thanks for clearing that up Ken!
Jay