Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: Sanwu Laser store - RGB handheld lasers, 405nm,445nm,465nm,470nm,505nm,515nm,520nm,525nm,635nm,650nm

Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Will have to ask ArcticDude about beam shots. I'm sure that is part of his plan. I am interested in how well these align and how difficult it is to realign one.
 





Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Can't disagree with that.
 
Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Yep, I also agree with Chris. Tero makes a great candidate to test out this new unit.
I also can't wait for the beamshots on this one. :beer:
 
Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Yep, I am also ready to see and read all about it. :D
 
Last edited:
Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Podo said:
Damascus steel is not cheap and hard to process, the guardian laser was our first attempt.

We do have a plan for a damascus steel RGB laser but that is gonna be limited (less than five) and they will not be cheap. :eg:
Click to expand...

and they will not be cheap. Imagine that
 
Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Where's the RGB review ? Any updates ? Was it lost in shipping ?
 
Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

I believe it was shipped a week ago. Will be at least another week before it arrives, I suspect. Probably longer. Right now, your rep is 21,689,615. As soon as I refresh the page it will be gone. :crackup:
 
Last edited:
Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Yours is now 21689xxxxx Do you see it that way or is it just me....I know it will revert when I leave or F5 the page.

---edit--- It reverted even faster than that, I posted this and then it had reverted. Yep we broke it LOL :wave:
 
Last edited:
Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

The maxed out person never gets to see his own rep go up. It is only by comparisons to other maxed out members that we even know that it happens at all. It certainly is about as broken as it could be now. Sometimes I do miss the good ole days when we were congratulating each other for making it to new milestones. Oh well. I guess we will have to make due with conversations about lasers.
 
Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Originally Posted by Podo View Post
Damascus steel is not cheap and hard to process, the guardian laser was our first attempt.

We do have a plan for a damascus steel RGB laser but that is gonna be limited (less than five) and they will not be cheap.



Mokume Gain would be even nicer than Damascus, I’ve been wanting to do a custom host for a while but it’s very expensive!
 
Last edited:
Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

badboybilly said:
Originally Posted by Podo View Post
Damascus steel is not cheap and hard to process, the guardian laser was our first attempt.

We do have a plan for a damascus steel RGB laser but that is gonna be limited (less than five) and they will not be cheap.



Mokume Gain would be even nicer than Damascus, I’ve been wanting to do a custom host for a while but it’s very expensive!
Click to expand...

Are you talking about Damascus steel in which you form it with hammers that have designs in them to hammer the steel in a pattern? like a Damascus shotgun? I have one and it iis beautiful can't shoot it but it's beautiful my material for a host would be copper I LOVE copper it is to me the most beautiful metal God created and I would love one with silver appointments That would be awesome and do a Damascus pattern in the copper.. Red bronze would be another beautiful metal to make one with.. I want to get into casting got a forge just got to get the other stuff and most of all knowledge in how to do it.
 
Last edited:
Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

IDK, casting the X0.5M lens threads might be a bit difficult to get right. Machining is likely the best option. I have copper hosts. I have two that were sprayed with acrylic after polishing and a MS Cyprus II that is all copper through and though. It has a module that is threaded to the outside heat sink to make good thermal contact. It is very well made, but I can't see it being made by casting it.
 
Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

paul1598419 said:
IDK, casting the X0.5M lens threads might be a bit difficult to get right. Machining is likely the best option. I have copper hosts. I have two that were sprayed with acrylic after polishing and a MS Cyprus II that is all copper through and though. It has a module that is threaded to the outside heat sink to make good thermal contact. It is very well made, but I can't see it being made by casting it.
Click to expand...

I am a lab laser kind of guy/ BUT someday I want a copper pointer LOVE copper
 
Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

Lifetime17 works with copper making hosts for sale on his sales thread. You might want to PM him and see what he has available, or ask him to build you something specific.
 
Re: FS: Sanwu Laser store - R/G/B handhelds x3 BE & Stainless steel "The Spiker" rele

You can now select "magnetic controls" for the striker saber laser!
Mag.png

Magnetic control rings(Optional)
The magnetic control rings allow user to adjust the power of the laser from 100mW to 5000mW(5W 445nm for example) by twisting the control rings along with the control to the operation mode.
 
Last edited:
You must log in or register to reply here.


Back
Top