Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



FS: Pocket Mini Build Kit! - Easy Assembly!






@ jayrob ... I ordered one of these bad boys from you (ricruiz). I already have a PHR + MicroBoostV1 installed in an Aixiz module like so:
2860-phr-build.jpg

Will it fit in this configuration or will I have to rework the driver to fit inside the pill like your examples?
 
Last edited:
Mostly depends on your modding skills...

I'm sure it could be built to work like that, without the contact board at the bottom of the pill. You would make a contact point on your driver for the battery positive. And then using hard foam on the sides of the driver to keep it from bending side to side...

But you would also want to keep the battery tension off of the pins by supporting the driver to the module...

There is more than one way to make it work...

But it's easiest to do the build as I show it in my first post. (IMO)
 
Last edited:
Thanks, I think I'll stick to your method, soldering some wires in sounds a lot easier.
 
Hope you guys like them!




SpyderFire, I sent your Pocket Mini Chrome/copper heatsink kits today. (Saturday)

Thanks!
 
Pocket Mini Chrome kits shipped today: (Monday)

jib77 (basic kit)
extelon (with 'Hot' option, copper heatsink, EzFocus adapter, 405-G-1)

extelon, your 'Hot' option is set at 120mA's per your request...

Hope you guys like them!
 
Just got mine a few minutes ago ... man this thing is sweet! Can't wait to put it together.

Thanks much jayrob.

UPDATE:

Here is the PHR and driver installed on the brass ring:
2932-phr-microboost-chrome-pocket-mini-pill-floor-i-used-some-foam-rubber-isolate-driver-bottom.jpg


Completed:
2933-phr-chrome-pocket-mini-completed.jpg
 
Last edited:
jayrob said:
Lane, just to let you know that I am sending your Pocket Mini basic kit and other item today. (Monday)

skellyd8758, your copper heatsink as well...

Thanks!
Click to expand...

Hi Jay,

Cu heatsink arrived today. :thanks:

Good fit too, nice job. :)


Thanks

David
 
hook me up with the works. .. pocket rocket mini ...
]:eg::takeit: *how much can be done*
 
Last edited:
This kit has quite a few options to look over...

I don't sell the diodes or the battery though.

Take a look at the first post, and then send me a private message. I'll get you a total... :)
 
rpaloalto, just to let you know that I shipped your Pocket Mini Chrome 'Hot' option kit with copper heatsink today. (Tuesday)

Set at 600mA's per your request...

Thanks!
 
Thanks jayrob.
This is one sweet little host. Ordering your hot option made building this laser a piece of cake:)

1-2.jpg

2-1.jpg
 
rpaloalto, glad you like it... nice pics. Thanks for posting! :)




AidanWhitwell, I sent your Pocket Mini 'Hot' option kits today. With EzFocus adapters and other items...

Thanks!
 
You must log in or register to reply here.
Back
Top