Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: Pocket Mini Build Kit! - Easy Assembly!

Sorry if it is confusing... There are a lot of options to think about with this kit! :D

* Pocket Mini basic kit - $43 plus shipping. This includes the host/Heatsink/and pill drilled out.

Then you can add these options if desired:

* 'Hot' option - $48 This option includes a FlexDrive pre-mounted with current set as desired, and lead wires soldered on. (more details below)
* AixiZ module - $5
* 405-G-1 glass lens mod - $55 28% increase for blu-ray vs AixiZ acrylic! Shown here: http://laserpointerforums.com/laser_pointer_forums_3/forum/showthread.php?t=22497 [/URL]
* Meredith glass lens mod for red (fit for AixiZ) - $57 20% increase for red vs AixiZ acrylic! Shown here: http://laserpointerforums.com/laser_pointer_forums_3/forum/showthread.php?t=22501 [/URL]
* EzFocus adapter - $20 (see first post)
* Tritium Marker installed - $24.99 (more details - first post)
* Shipping - $6 (this covers my packaging and PayPal fees as well)

Shipping out of the U.S. will be the same price. But there will be no signature confirmation. (Out of U.S. buyer assumes responsibility at that price) Should not be a problem though... (I would mark the package as a gift, with a description of 'LED Flashlight' with a low value of $15)
Jay
 
Last edited:





Hi so I plan to build a red burner around 275 mW using a flexdrive from dr lava. I also need a heatsink and a aixiz module. I already ordered the diode from modwerx. So what options do I have, jayrob, about the host and heatsink? I just saw your new design. What does the 20$ price include?

P.s I already read the first post but I thought you could suggest me the best option :D
 
Last edited:
If you already ordered the FlexDrive, then all you need is the basic Pocket Mini kit...

This includes the host/heatsink/and drill the pill.

Other options (in order of importance) are the 405-G-1 glass lens modification which can be added any time. It is designed for an AixiZ module, so make sure of that before you get one. I have heard that the Sure modules are not always threaded all the way down on the inside.

The $20 dollar EzFocus adapter is designed for use with the 405-G-1 glass lens mod. It is just an easy way to control the focus without burning your fingers:

PMEz1.jpg


And then there is the Tritium marker if you want... This is just a glow in the dark marker that is glued into a machined slot with clear silicone.

Just for looks, but Tritium is really cool stuff! It has a half life of about 12 years. It glows at all times. It does not need light like normal GITD material...

Tritium1.jpg

Jay
 
Ok so, I am interested in a mini kit that includes an xdml host, a heatsink and drill the pin. I will finish ordering a flexdrive and as I said, I already ordered a red diode from modwerx. Could you tell me if you can include an aixiz module with small wires as in the picture avobe, so I can connect my diode to the lava drive?? I don't have any spare aixiz that's why I ask.. Also, how much would that be to ship to Greece? Thanks

Peter
 
Last edited:
Here's the price:

* Basic Pocket Mini Kit - $43 (Host/Heatsink/Drill the pill)
* AixiZ module - $5
* Shipping - $6 (this covers my packaging and PayPal fees as well)

Shipping out of the U.S. will be the same price. But there will be no signature confirmation. (Out of U.S. buyer assumes responsibility at that price) Should not be a problem though... (I would mark the package as a gift, with a description of 'LED Flashlight' with a low value of $15)

Total - $54 U.S. dollars... (I will include some fine wire, just remind me when you pay)

Sending PM,

:thanks:
Jay
 
Yeah, these kits are so awesome :D
I like them very much. This will be my first handheld laser built. I can't wait to receive a new credit card to complete the payment for jay :/
 
hey i was wondering if you had any of the silver hosts left those look cool to but if not thats fine too
could i just use a cr123 primary 3v
 
I only have the black hosts...

Personally, I prefer the CR123 primary. It fits better in the host, and it has more capacity. It also will hold it's charge if your leave you laser sitting.

These batteries are expensive at your local store, but they can be bought on-line for cheap. And they have like a 12 year shelf life, so I buy them 12 at a time. You can't go wrong! :)

Energizer e2 Lithium Primaries: http://www.batteryjunction.com/energizer-cr123a.html
Jay
 
hey jay sorry for the delay but as I said, I am having problems adding my credit card to the paypal account... I 'll pm you when I pay. Thanks
btw, those Energizer e2 Lithium Primaries are rechargables?
 
Last edited:
JacobH, your Pocket Mini kit, EzFocus adapter, and other items shipped today! (Monday)

Hope your build goes well! :)
Jay
 
hey does the battery go - towards the diode or + towards the diode
ps do you want an empty d cell blue maglite wwith the reflector i have no use for it maybee for a discount or something:)
 
Thanks anyway, but I have tons of hosts and stuff...

The first post in this thread has some build tips, and can be used as a tutorial on the assembly. There is also a picture of the correct battery orientation. (case negative)
Jay
 
You must log in or register to reply here.





Back
Top