Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

FS: DIY Green Kit! Host, Heatsink - Easy Assembly!

Joined
Aug 31, 2009
Messages
2,157
Points
0
Scotty you can trust the things JayRob sells. Everything I have purchased from him is built tough and will last as long as you live. It really is top quality all metal materials.... no glue and/or plastics
 





Joined
Dec 30, 2009
Messages
508
Points
18
Yes it is nice that O-like got it back. Also Crazy Jay trust me I know. I don't feel like a true LPF member till I get one of JayRobs kits. :)
 
Last edited:
Joined
Mar 26, 2010
Messages
90
Points
0
hey jay, do you think you could make me one of these. I sent you a PM but i dont know if you got it. tell me if i should send you another.
 

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Yes, I sell the kit as shown in the first post of this thread...

You will just buy your own module (links shown in first post), and follow the 'picture tutorial' in the first post as well...

It is a very easy assembly that can be done in less than 5 minutes!
 

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Can do!

Send me a private message for total, and payment information...
 

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
DIY Green kits shipped today: (Saturday)

Bijeebus (with green tritium installed)
knorkneutel (with kaleidoscope tip too)

Thanks!
 
Joined
Feb 29, 2008
Messages
2,344
Points
0
Jay, could you make a aixiz size heatsink for an IR build?
Also, could you drill out an aixiz module for a 9mm diode?

Thanks
Rob
 

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Yes, but the problem is, I would need the diode for a couple of reasons...

1. Just to make sure of the fit. Pressed in tolerances are very close.

2. For fitting it to an AixiZ module, I would want to test the ability to get focus.

I have not had much experience with IR builds. I messed around with some IR diodes from Senkat, but never built them into a hand held laser.

I know that they are case positive. And this presents a problem with most drivers. You would have to isolate the heatsink from the host.

Or get a driver that regulates the current through the negative side of the driver. Such as an AMC7135...
 

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Got you covered!

Sending PM...





ralph9994, I'll be shipping your DIY Green kit today. (Monday)

Thanks!
 
Joined
Mar 26, 2010
Messages
90
Points
0
My kit came in today, its really well made. Just waiting for my module now. Thx jayrob
 
Joined
Mar 16, 2010
Messages
29
Points
0
My kit came today (Saturday). so that means 5 days for the shipping.
so it came quite quickly. thnx

now it waiting for the module....
 

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Glad you guys like them! :)




Diyode, I am sending your DIY Green kit today. (Tuesday)

Thanks!
 




Top