FS: Custom Focus Adapters For Any Host! New Designs! Polishing Available!

[Mrcrouse]

All knobs threaded .15" deep to accommodate Aixiz glass lenses.
Prices are currently listed for 1", 1.375" and 2", as that I have about 8 feet or so of each of these sizes. In between sizes are obviously available as I simply will turn a piece down. In between prices may also be offered if I have a smaller pieces of barstock that is more suited for your size.

For example, you wants a knob that is 1.1" OD. I have a little bit of 1.125" laying around, so I may charge your $9 instead of $12 for a 1.375" knob.


Knurled Flat Knobs

~1" OD : $7ea
~1.375" : $12ea
~2" OD : $18ea
(Knobs are ~1/4" thick, add $1.50 per additional 1/8")

Knurled Chamfered Knobs:

~1" OD: $15ea
~1.375 OD: $20ea
~2" OD: $25ea

OD Drilled Chamfered Knobs:

~1" OD : $20ea
~1.375" OD : $25ea
~2" OD : $30ea

OD Finned Chamfered Knobs:

~1" OD : $23ea
~1.375" OD : $28ea
~2" OD : $33ea

Flat Slotted Knobs:

~1" OD : $25ea
~1.375" OD : $25ea
~2" OD : $30ea

Slotted Chamfered Knobs:

~1" OD : $35a
~1.375" OD : $30ea
~2" OD : $35ea

Slotted Break-Thru Chamfered Knobs:
(Also Available Flat for $5 less ea)

~1" OD : $32ea
~1.375" OD : $30ea
~2" OD : $35ea

Slotted Chamfered Knobs With Holes:

~1" : $28ea
~1.375" OD : $32ea
~2" OD " $37ea

And eventually to come...

Ball Nosed Chamfered Knobs:

~1" OD : $30ea
~1.375" OD : $35ea
~2" OD : $40ea

(Vertical Holes not included in quoted prices)

Chamfered Knobs can also be chosen to be flat, or the angle to be changed.

Knurling:

Knurling can be added to any knob

~1" OD : $2ea
~1.375" OD : $3.50ea
~2" OD : $5ea

Assault Knobs:

~1" OD : $25ea
~1.375" OD : $28ea
~2" OD : $32ea





Polishing:

~1" OD : $5ea
~1.375 OD : $8ea
~2" OD : $12ea

Custom Knobs and Heatsinks also available. I have both turning and milling capabilities

 

[Mrcrouse]

Re: FS: Custom Focus Adapters! New Designs! Polishing Available!

New knob designs now up! The ball designs will be made available based on interest.

 

[mhemling33]

Re: FS: Custom Focus Adapters! New Designs! Polishing Available!

I really like the ball design it is going to look awesome. Plus I am really liking the 3d designs to pick from. keep up the great work!

 

[awillis2589]

Re: FS: Custom Focus Adapters! New Designs! Polishing Available!

These are very cool!!! keep up the good work.

 

[Mrcrouse]

Thanks! Added another design today. :beer:

 

[Mrcrouse]

Another design up

 

[Lonewolf]

Bump for these killer focus adapters..... aypal:and :thanks:

 

[Malav]

So they fit all
Lasers??

 

[Mrcrouse]

These are custom made to whatever size you need to properly fit your laser.

 

[Malav]

So which would for this ---

LP 532nm 1-150

 

[Mrcrouse]

That pen is not focusable. These adapters replace the aixiz lens nut that would be used on most adjustable focus lenses.

 

[Mrcrouse]

Bump!

 

[phoenix77]

Bump! Nice machining!

 

[clif]

nice work man!

 

[gkw12345]

That pen is not focusable. These adapters replace the aixiz lens nut that would be used on most adjustable focus lenses.

Hello!

I do use laser pointers quite a bit but I'm rather foreign to the mechanics of a laser so pardon the simple question.
May I know how this adapter replaces the current focusing knob?
As in, how do I transfer the 3-element lens to the focusing knob and thread the whole thing into the laser etc?

Thanks

Edit:
Upon inspection of the focusing 'module' I have on the laser, I'm assuming that the front knurled ring can be unscrewed and just be replaced with your focusing knob?

 

[Mrcrouse]

Hello!

I do use laser pointers quite a bit but I'm rather foreign to the mechanics of a laser so pardon the simple question.
May I know how this adapter replaces the current focusing knob?
As in, how do I transfer the 3-element lens to the focusing knob and thread the whole thing into the laser etc?

Thanks

Edit:
Upon inspection of the focusing 'module' I have on the laser, I'm assuming that the front knurled ring can be unscrewed and just be replaced with your focusing knob?

Correct

: