Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: 405-G-1 Glass Lens Mod - 31% Increase vs AixiZ!

405-G-1 glass lens assemblies shipped today. (Tuesday)

Geoffcake (with SS 18650 kit)
insaneware (your lenses)
Coherent Light
IgorT (with AixiZ lenses too)

Thanks!
 





Your welcome!



405-G-1 glass lens assemblies shipped today. (Wednesday)

faust647 (with kit)
piker531 (with heatsink)

Thanks!
 
Spartan X, I sent your 405-G-1 glass lens assembly with small aperture sleeve today. (Thursday)

Thanks!
 
405-G-1 glass lens assemblies shipped today. (Friday)

MeanGreen
asout (with SS 18650 kit)

Thanks!
 
Jay:

Got Mine today!:wave: Thanks man. Fits just fine in My laser without the Kurled focus ring. Still have the crappy Ass multi-mode Line/rectangle, and a slight splash, but lots more power! I'll see about trying to add a short focal length Cylindrical lens. You have any suggestions here?

Coherent:
 
I'm waiting for my correction optics kit from drlava...
http://laserpointerforums.com/f55/cylindrical-correction-optics-445-638-a-52925.html

Then I can do some testing. So far I have only tested the normally available lenses with these multimode 445's. The AixiZ 445 lens gives the best looking dot for a cheap 'off the shelf' solution.

But it is about 15% to 20% less power that the 405-G-1...

See lens comparisons for 445 here:
http://laserpointerforums.com/f65/445nm-a130-lens-comparisons-51456.html
 
jayrob said:
I'm waiting for my correction optics kit from drlava...
http://laserpointerforums.com/f55/cylindrical-correction-optics-445-638-a-52925.html

Then I can do some testing. So far I have only tested the normally available lenses with these multimode 445's. The AixiZ 445 lens gives the best looking dot for a cheap 'off the shelf' solution.

But it is about 15% to 20% less power that the 405-G-1...

See lens comparisons for 445 here:
http://laserpointerforums.com/f65/445nm-a130-lens-comparisons-51456.html
Click to expand...

Jay would you be able to make an addon for the standard aixiz modules that holds these correctional optics?
 
Yet to be determined...

But I kind of doubt it.

I don't know for sure yet, but I would imagine that these correction optics will take up some room. (labby build)
 
What would half or full ball lens do? I have not worked with them before, but they would seem to be the correct size for a module.

Coherent:
 
Never tried it, but there are a lot of people testing various things...

So far, no perfect solution...

Maybe soon we will hear of the best set up. For now, there are two lenses that are pretty good...

The 405-G-1 gives the most power, but the AixiZ 445 gives a better looking dot at 15% to 205 less power...
 
jayrob said:
Never tried it, but there are a lot of people testing various things...

So far, no perfect solution...

Maybe soon we will hear of the best set up. For now, there are two lenses that are pretty good...

The 405-G-1 gives the most power, but the AixiZ 445 gives a better looking dot at 15% to 205 less power...
Click to expand...

Do you have any AixiZ lenses left? How much?
 
If You get a chance take a look at Doric Lenses Inc. ACL-FAC lens This might be interesting to get a hold of.

Coherent:
 
Jay:

Have You ever used Loc-Tite on Your modules? The threads are cut so shitty on this Laser that Even with the spring and teflon tape I can set focus perfect, and it will just drift off over a bit of time. I am thinking of using the Loc-Tite, but NOT super glue. What do You think?:banghead:

Coherent:
 
What laser are you putting the lens into?

The lenses fit fine into an AixiZ module with a little Teflon tape...
 
You must log in or register to reply here.


Back
Top