Re: FS: >90mW Blu-Rays, two models: OPEN
VillageIdiot said:
So how d'ya focus to infinity?
You point it at the most distant wall, and turn the lens untill the spot is the smallest.. The lens has to be screwed in almost completelly for this - the metal focusing ring just a little away from the heatsink.
If you then point it at an object further away, you may notice it's larger, so you can adjust it then, to make it small. With this strange color, it helps if you squint your eyes a little..
The best way to focus it to infinity is to put those glasses on someone else, send them to the wall you focus it at, and have them tell you when the spot is the smallest.
Anyway, after you tighten the module into the head, focusing will also be easier, as the metal focusing ring will stick further out. Please follow the instructions i sent you to your email!
The notches you have to put the tweezers in are not on the board! They are in the edges of the aluminum module right at the inner wall of the head! Do not poke the board!
Tightening the module should be VERY easy with the lens cap removed. It'll just turn. But when it stops, you also have to make it a little tight.
Please do this, as it is very important for the laser being perfect. If you need additional instructions ask me.