**F/S**BR/RED with driver in Aixiz Module $40

[BluRay]

Milantheone, So you want the Module with the diode in it, but without the wires soldered onto the diode? and the other wires to the batt soldered on???




Tommy

 

[milantheone]

Milantheone, So you want the Module with the diode in it, but without the wires soldered onto the diode? and the other wires to the batt soldered on???




Tommy

tommy, i attached a picture which is on the previous pattern, but here we go one more time.....
all i want is wired conection between diode and driver {cca 2inches} instead direct connection  LD+V3...
sorry for inconvenience...

cheers

 

[diachi]

Bump

 

[BluRay]

DiaChi whats the bump?? did you see the upddate on the 1st post?

Yours and Milantheone will be out on Monday






Tommy

 

[diachi]

DiaChi whats the bump?? did you see the upddate on the 1st post?

Yours and Milantheone will be out on Monday






Tommy

Bumped it so more people would see it, also i couldn't be bothered searching through pages to find the thread .

How long should shipping take ? :-?

thanks,

-Adam

 

[BluRay]

7-10 days usually.


I have some more Flex from the other orders comming so it wont be too long guys.


Others who have ordered BR with the RKCSTR driver, it has been sent also.


Ham549 yours resent
Enkryptik your resent



Tommy

 

[pseudonyms]

I would be interested in buying one of these. I can't decide which one though.

What is the highest mW rating you can set it to?

 

[Lol]

I really want to buy one of those. Probably the blu-ray one.
Maybe I'll buy one when I'm back home again from Gran Canaria ;D

 

[pseudonyms]

What is the advantage to using a rkcstr driver rather than a flexdrive?

is there any advantage or what?

 

[diachi]

What is the advantage to using a rkcstr driver rather than a flexdrive?

is there any advantage or what?

RKCSTR driver needs to have a higher input voltage , the flexdrive is a boost driver meaning you can use lower voltages than what the diode needs.

-Adam

 

[milantheone]

What is the advantage to using a rkcstr driver rather than a flexdrive?

is there any advantage or what?

well i my opinion is advantage to use a Flexdrive rather than Rkcstr... you will need power supply only between 2.5 - 5.5 V instead of 7-9v with Rkcstr... for me this is essential.. there are of course some diferences in dimensions, but i think that the main difference is in voltage...
i prefer flexdrive but it is just my subjective opinion, so you sould make your own conclusion what will be better for your needs... if you will want to use 9 volt battery {rkcstr} or if you want to have more options which battery you will use = 2xAA or AAA, cr2, cr123A, 3xAA or AAA, 1x10440 3.6V, 1x14500  3.7V,  1x18650 3.7V  {flexdrive}

i hope this help

 

[pseudonyms]

[quote author=pseudonyms link=1224680882/240#253 date=1231273348]What is the advantage to using a rkcstr driver rather than a flexdrive?

is there any advantage or what?

RKCSTR driver needs to have a higher input voltage , the flexdrive is a boost driver meaning you can use lower voltages than what the diode needs.

-Adam[/quote]
But in this case, a rkcstr seems to be better for the price if I'm just using a 9v battery or 3 3v rechargable batteries and I'm not worried about it. I'm a laser noob, if you couldnt tell.

 

[pseudonyms]

Could you put me down for 1 regular BR. Also, would 110 be fine if I simply mount it in a hobby box, because I want to mount a switch and battery pack to it, so that makes it easier to change batteries/turn on and off? I wasn't planning on extended use, just ease of mounting it.

I'll contact you after you send the PM

 

[rebman]

What are the Red ones rated at?

 

[pseudonyms]

I'm dying to get my hands on this! :-[ Contact me ASAP!

 

[BluRay]

rebman The red modules set to max on a Rkcstr driver full range will put out around 240mW+ but under 250mW. To go more higher you'll need a flexdrive or order a pre set one from Rkcstr himself.


pseudonyms PM replied.




Tommy