artix
0
- Joined
- May 24, 2008
- Messages
- 994
- Points
- 0
lamborgini8 said:[quote author=Artix link=1219179774/20#30 date=1219346581][quote author=lamborgini8 link=1219179774/20#29 date=1219344107][quote author=pullbangdead link=1219179774/20#28 date=1219343876]Some otherpeople will have to chime in on this one, but that might not be the case. The only way to know for sure is to test them, but I seem to recall some people getting drives where the flat-packaged diodes were red and the IR was the classic can package.
The front of the red diode is exactly the same as this:
http://www.thesellgrens.com/laserpics/harvestdiy/8.jpg
So I am pretty sure thats the red diode.
Although what exactly im suposed to do with that I am not sure, i thought there is meant to be a little lens or something over the front of that.[/quote]
That looks like a long open can! [smiley=thumbsup.gif][/quote]
Wow that was scary...
Used a file to get through the heat sink and get to the diode. Had a scare after that because I used a multimeter to check it still worked and I couldn't get a reading out of it so I had two options. Let my dad take it to work and check it under the electronics microscope thing or add some batteries to it and see if it works.
So thinking it was dead anyway I connected the same batteries I was using in my Viper 75 up to it and RED! BEAUTIFUL RED!
So it is working now
I have ordered some aixiz housing, hopefully that will be here some time next week and my dad being an electronics person anyway has looked up the DDL driver and said he has something like that thats at 300mAh which can be turned down.
Only thing I am lost on now is the actual diode itself. On all the guides around here the diode has a tiny little bit of glass right in front of it. Mine looks exactly like this.
http://www.thesellgrens.com/laserpics/harvestdiy/8.jpg
Do I need the little bit of glass or is it ok to put it in the aixiz housing like that?[/quote]
That lens is just a fragile window, just press the diode into the module and it should be fine!