Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

DTR's Laser Shop: Diodes-Drivers-Lenses-LEDs & More






Re: 445 1-2W Blue Diodes *Tested* $45 Shipped US $40 each additional in same order.

@DTR How much are you asking for the NJG-18's?
 
Re: 445 1-2W Blue Diodes *Tested* $45 Shipped US $40 each additional in same order.

Hi DTR :)
I'm interested in a diode mounted in a Aixiz module... are they still available?
the driver is pre-setted for a specific current?

:thanks:
 
Re: 445 1-2W Blue Diodes *Tested* $45 Shipped US $40 each additional in same order.

rocket689 said:
@DTR How much are you asking for the NJG-18's?
Click to expand...

$10 shipped $17 for it with leads attached and set to desired current. Or you can pick the bare drive from kaidomain for $5 with 3+ week shipping.

Arayan said:
Hi DTR :)
I'm interested in a diode mounted in a Aixiz module... are they still available?
the driver is pre-setted for a specific current?

:thanks:
Click to expand...

No problem I have plenty. I will shoot you my PP address. I can get it out today.;)

See previous reply for the NJG drivers that I have.:D
 
Re: 445 1-2W Blue Diodes *Tested* $45 Shipped US $40 each additional in same order.

:paypal:
 
Re: 445 1-2W Blue Diodes *Tested* $45 Shipped US $40 each additional in same order.

Sounds good it will be out first thing in the morning.:beer:
 
Re: 445 1-2W Blue Diodes *Tested* $45 Shipped US $40 each additional in same order.

How high will you set the njg's DTR? And will they run off of a single lithium ion?
 
Re: 445 1-2W Blue Diodes *Tested* $45 Shipped US $40 each additional in same order.

jakeGT said:
How high will you set the njg's DTR? And will they run off of a single lithium ion?
Click to expand...

About 1.4A. Yes It will run off a single 3.7V Li-Ion.:beer:
 
Re: 445 1-2W Blue Diodes *Tested* $45 Shipped US $40 each additional in same order.

I've never worked with the Njg's, and just wasn't sure about it
 
Last edited:
Re: 445 1-2W Blue Diodes *Tested* $45 Shipped US $40 each additional in same order.

I will be purchasing a diode from you next pay check but in the mean time...So just to straighten my confusion out. Am I able to connect the negative and the case pin together on the diode like on the V5? Does the driver spring connect to the positive side battery? Then I can use the host as the negative? Sorry just never used these drivers before and I did read the post that was linked. Still am a little confused thou.
 
Last edited:
Re: 445 1-2W Blue Diodes *Tested* $45 Shipped US $40 each additional in same order.

joebob said:
I will be purchasing a diode from you next pay check but in the mean time...So just to straighten my confusion out. Am I able to connect the negative and the case pin together on the diode like on the V5? Does the driver spring connect to the positive side battery? Then I can use the host as the negative? Sorry just never used these drivers before and I did read the post that was linked. Still am a little confused thou.
Click to expand...

If you are referring to the Flexdrive V5 yes you can bridge the case pin and negative if your host is case negative. But the Flexdrive does not have a spring.:thinking: Unless you are talking about the spring on the stock driver of a flashight host. What kind of host do you have?
 
Re: 445 1-2W Blue Diodes *Tested* $45 Shipped US $40 each additional in same order.

I believe he is talking about the njg 18.

P.S. I am still waiting on your tests... :whistle:
 
Re: 445 1-2W Blue Diodes *Tested* $45 Shipped US $40 each additional in same order.

DTR said:
If you are referring to the Flexdrive V5 yes you can bridge the case pin and negative if your host is case negative. But the Flexdrive does not have a spring.:thinking: Unless you are talking about the spring on the stock driver of a flashight host. What kind of host do you have?
Click to expand...

I have an aurora cree c6 flashlight. I've tried to find data sheets on this driver but haven't been able to find any so I'm just going off a few pictures. OK, so if I use this NJG-18 driver how do I wire it up correctly? Does the sping on the NJG-18 go to the positive side of the battery? Can my host be negative? Do I join the case and negative pins? I'm pretty much trying to draw a diagram on how to wire it.
 
You must log in or register to reply here.


Back
Top