dmx 512 for reke 500
- Thread starter bdgreenb
- Start date
Pretty much everything will work, all DMX is the same. Obviously you can get better controllers, but unless you're actually using it with other lighting fixtures, just get something cheap.
I personally have the DMX USB Pro from Enttec, which I paid about $250 for like 5 years ago. I think they're down to like $150 now. but you can get much cheaper interfaces on eBay.
I personally have the DMX USB Pro from Enttec, which I paid about $250 for like 5 years ago. I think they're down to like $150 now. but you can get much cheaper interfaces on eBay.
bdgreenb
0
- Joined
- Jul 20, 2011
- Messages
- 723
i went ahead and grabbed one of these
512 Channel USB DMX Controller Module MAC OSx PC/Laptop | eBay
i'll do a review when it arrives, cant wait :san:
512 Channel USB DMX Controller Module MAC OSx PC/Laptop | eBay
i'll do a review when it arrives, cant wait :san:
bdgreenb
0
- Joined
- Jul 20, 2011
- Messages
- 723
300mw 650nm Red 50mW 532nm Green 150mW 450nm Blue Laser RGB Full Color Animation Laser Light DJ Equipment Auto Sound DMX512 ILDA PC Master Slave Stage Laser Light Projector Reke-500RGB
wait for one of their discounts on the unit at the same time as a coupon... this is DD/lasersman/iirc laserbtb
wait for one of their discounts on the unit at the same time as a coupon... this is DD/lasersman/iirc laserbtb
dfhrace
0
- Joined
- Feb 12, 2010
- Messages
- 129
so ive been having some issues with the dip switch addressing for the unit. i have dip "1" and "10" on like it says in the manual which would mean dip "2" would start the addressing? and it would start at address "1" or would it be "2"? I am so lost as to why i cant find what my reke is addressed to with my board
- Joined
- Dec 31, 2012
- Messages
- 904
Isn't it right justified?
1-2-3-4-5-6-7-8-9-0
X-0-0-0-0-0-0-0-0-X Pins 1 & 10 not used for addressing.
X-0-0-0-0-0-0-0-1-X address #1
X-0-0-0-0-0-0-1-0-X address #2
X-0-0-0-0-0-0-1-1-X address #3
and so forth?
dfhrace
0
- Joined
- Feb 12, 2010
- Messages
- 129
i tried that too and i cant seem to find it with my board. but whats odd is sometimes when its plugged into the board it will randomly throw out an image for about 2-5 seconds then it stops. now i didnt move any of the sliders or touch anything it just randomly puts up a static image. could it be possible that the dmx card? is faulty?