daguin
0
- Joined
- Mar 29, 2008
- Messages
- 15,989
- Points
- 113
[highlight]THIS SALE IS CLOSED. I'LL BE POSTING THE "END OF THE YEAR" SALE IN A BIT 
[/highlight]
Well the Holidays are upon us and the lasers are stacking up! It's time for the first annual
daguin Holiday Clearance Sale (cue the wintery music)
;D
Get one for yourself for the Holiday. Get one for a friend.
There's a bunch of them here. Something for everyone. I didn't do any beam shots (OK I did one) because this will be way too long already. I may have to break it up into more than one post already. If you want a beam shot, they look like all the other beam shots on the forum
Once again, because of the number of offerings here, the lasers will be numbered. When PMing me, please refer to the laser number somewhere in the PM. It will speed things up significantly. In the case of more than one showing interest in the same laser the earlier PM will get it. As always reasonable offers will be considered, especially if you are buying more than one unit. Here we go . . . . . .
[highlight]**SOLD** [/highlight]#1 is a matched set. It is custom built in a new host. Both have custom made Jayrob heat sinks. Both have the flexdrive. Both have the AixiZ module with clear acrylic lens. The blu-ray is a PHR-803T diode putting out 150mW. The red is a long closed can diode putting out 220mW. These outputs are set for good burning ability and longevity. They come with AAA batteries. The set comes with lens caps, a storage/carrying case, and individual belt holders. If you want a laser that no one else has, this set is for you. I promise that "I" will NOT build any more lasers in this host to help keep them unique. This set is offered at $275, Shipped in the US.
[highlight]
**SOLD** [/highlight]#2 is a matched set. It is in the well known MXDL host. Both have Jayrob heat sinks. Both have the flexdrive. Both have the AixiZ module with clear acrylic lens. The blu-ray is a PHR-803T diode putting out 160mW. The red is a long closed can diode putting out 220mW. They come with a set of 17670 batteries. These outputs are set for good burning ability and longevity. The set comes with lens caps and a storage/carrying case. This set is offered at $275, Shipped in the US.
[highlight]SOLD [/highlight]#3 and #4 are trade-ins. These were originally a custom built matched set. The original owner loaned then to a "friend." As often happens when an uneducated (about lasers) person get hold of a laser, when they were returned they were both dead. The original owner found out that 405nm is more fun than 660nm so he wanted these rebuilt into both violet lasers. He then decided he wanted to "trade up" to a more powerful matched set. These are used, but rebuilt, lasers. They are still in "like new" condition and have new drivers and diodes. They both have custom made Jayrob heat sinks. They both have Rkcstr drivers. Both have the AixiZ module with acrylic lens. They come with dust caps and a set (2) of 10440 batteries. Laser #3 is putting out 150mW. Laser#4 is putting out 130mW. These lasers are offered at $115 EACH, shipped in the US.
[highlight]SOLD [/highlight]#5 is built in the famous WL Sonar white host. It has the custom DarkHorse heat sink/module. It has a flexdrive. It uses the PHR-803T diode in an AixiZ module head with the acrylic lens. It comes with two CR123 batteries. It is putting out 145mW. The front of the host has been opened up a bit to allow for focusing in case you decide to burn something. It comes with the original WL case. Laser #5 is offered at $175, shipped in the US.
[highlight]RESERVED [/highlight]#6 is built in the Kryton "Smooth" host. It has a flexdrive. It uses the AixiZ acrylic lens. It comes with two CR123 batteries. The clicky cover is GITD. This laser is putting out 155mW. This unit apparently missed the "chasing" of the lens nut threads. The lens is "tight." You have to use a screwdriver to change the focus. It turns fine. It is just too tight to turn with your fingernail. I have it set to "infinity" now so you may never want to refocus it anyway. It is offered at $175, shipped in the US.
[highlight]SOLD [/highlight]#7 is built in the MXDL "Chicken Leg." It has a massive Jayrob heat sink. It has a Rkcstr driver. It uses an AixiZ module with the acrylic lens. This laser has the long closed can diode. It is putting out 220mW. It comes with a dust cap and two 10440 batteries. It is offered at $75, shipped in the US
[highlight]SOLD [/highlight]#8 is built in the MXDL "Chicken Leg." It has a massive Jayrob heat sink. It has a flexdrive. It uses the Merideth module with a glass lens. This laser has the "new" 4X diode. It is putting out 180mW. It comes with a dust cap and three AAA batteries. This was one of my "working" lasers. As such it has a few VERY MINOR scuff marks. It is offered at $175, shipped in the US.
Continued in next post
[/highlight]Well the Holidays are upon us and the lasers are stacking up! It's time for the first annual
daguin Holiday Clearance Sale (cue the wintery music)
;DGet one for yourself for the Holiday. Get one for a friend.
There's a bunch of them here. Something for everyone. I didn't do any beam shots (OK I did one) because this will be way too long already. I may have to break it up into more than one post already. If you want a beam shot, they look like all the other beam shots on the forum
Once again, because of the number of offerings here, the lasers will be numbered. When PMing me, please refer to the laser number somewhere in the PM. It will speed things up significantly. In the case of more than one showing interest in the same laser the earlier PM will get it. As always reasonable offers will be considered, especially if you are buying more than one unit. Here we go . . . . . .
[highlight]**SOLD** [/highlight]
[highlight]
**SOLD** [/highlight]
[highlight]SOLD [/highlight]
[highlight]SOLD [/highlight]
[highlight]RESERVED [/highlight]#6 is built in the Kryton "Smooth" host. It has a flexdrive. It uses the AixiZ acrylic lens. It comes with two CR123 batteries. The clicky cover is GITD. This laser is putting out 155mW. This unit apparently missed the "chasing" of the lens nut threads. The lens is "tight." You have to use a screwdriver to change the focus. It turns fine. It is just too tight to turn with your fingernail. I have it set to "infinity" now so you may never want to refocus it anyway. It is offered at $175, shipped in the US.
[highlight]SOLD [/highlight]
[highlight]SOLD [/highlight]
Continued in next post
