Custom NUBMO6 5.5w+ pen build!

[badboybilly]

For some reason I love building very compact lasers, I only just got everything in, I also love solid hosts so there is 5mm thickness all around, my heatsinked is a 20mm module reduced, the whole diameter of the host is 22mm,

The heatsink and driver pill were pressed on a vice with thermal grease,

This host has awesome heatsinking now even though it's small for this power,
It gets warm within a few seconds but that just means it's extracting the heat nicely, I used a 4.5a preset SXD and the diode a NUBMO6 was extracted from another build, Reson for the wires without a press sink,

This diode has me wondering why it's so similar in wavelength to my 7675s and 07 very strange it wasn't that tint when it was in my Led lenser at 3a must be the extra 1.5a,

The led switch was given a little over 2v so no more led, and I didn't want to resolder a new switch and modify to fit,

It's using 2 14500 Sanyo,s. Hope u all enjoy my work!

 

[badboybilly]

Custom Pen Continued!

 

[badboybilly]

Custom Pen Continued 1

 

[badboybilly]

Custom Pen Continued 2



Just a quick vid!

https://youtu.be/GCoIFXeBKCc

https://youtu.be/rMHou_uu3Wg

 

[BobMc]

Always amazed it the quality of your builds. Very nice build thread, that's a little power house. 5.55 out of that little guy, sweet! Enjoy that puppie! :gj:

 

[BowtieGuy]

Another nice compact build bbb, great work! :beer:
All of the in-process photos are a nice touch, always enjoy seeing what goes into a build as they're all unique.
I also tend to gravitate to these compact builds; all that power in such a small package. The nice side switch is always a plus!
:gj: +rep!

 

[lasersbee]

Nice detailed build and photos... Well done.

Jerry

 

[Dutch67]

Beautiful laser! I assume you machined the host yourself? Amazing work as always man +rep:beer:

 

[badboybilly]

Thank you all! I brought it in to work tonight and everyone I showed was very impressed,

Mind you most have not seen such a powerful beam,

This is my new carry around pocket shocker!
Love it,

I should have made this one adjustable with a hidden pin whole, would have been awesome!

 

[RB astro]

Amazing and beautiful as always Billy.
Thanks for sharing so we can all drool over your work.

:beer:

Cheers my friend.
+rep you when I can.

RB

 

[RedCowboy]

Good looking work there bbb

 

[dden4012]

Very nice. Looks like you put a lot of work into that host.

 

[TheDukeAnumber1]

I love it!

 

[Crazlaser]

Nice power. Hoping to see someone do this with 10440's in a more "pocket" size host.

 

[badboybilly]

Nice power. Hoping to see someone do this with 10440's in a more "pocket" size host.

Did this one a while back, it's using a NDB7875, but again I prefer more solidness to my hosts instead of boring out all the alloy to a thin tube.

http://laserpointerforums.com/f65/3w-laser-beginner-build-97086.html


Thanks again all for liking it!