Custom Copper heatsinks made to order

[conrad]

PM sent - I can send you my host if neccesary.

 

[Sk8trboipyro]

How much do you think it would cost to get a heatsink made for this host?
DealExtreme: $9.90 Ultrafire WF-501B Philips Luxeon K2 White LED Flashlight (1*18650/2*CR123A)

 

[Flaminpyro]

In copper that would be $37.50 and that would include a machined Aixiz module fitted to the heatsink.
Pyro...

How much do you think it would cost to get a heatsink made for this host?
DealExtreme: $9.90 Ultrafire WF-501B Philips Luxeon K2 White LED Flashlight (1*18650/2*CR123A)

 

[Sk8trboipyro]

what about aluminum?

 

[Flaminpyro]

How about $27.50 in aluminum ...

what about aluminum?

 

[Flaminpyro]

If you send me the host you will get the very best fit possible ! thus the best heatsink possible !

Pyro...

PM sent - I can send you my host if neccesary.

 

[Sk8trboipyro]

In copper that would be $37.50 and that would include a machined Aixiz module fitted to the heatsink.
Pyro...

how much would it be without the Aixiz module? I'm using a sure module, and i could send you that with the host. It won't be for a little while, as i need to get the funds together.

 

[Flaminpyro]

If you send the sure module with the host then I can machine fit both pieces to the heatsink. that would be $24.00
I won't be back till after xmas so the time frame works out !
Pyro...

how much would it be without the Aixiz module? I'm using a sure module, and i could send you that with the host. It won't be for a little while, as i need to get the funds together.

 

[Sk8trboipyro]

what about copper without the module?

 

[Flaminpyro]

Same in copper would be $34.00.....

Pyro...

what about copper without the module?

 

[Sk8trboipyro]

How much would shipping be for a coleman max cr2 heatsink? and it is $25 for the heatsink and rib reduction on it, am i correct?

 

[Flaminpyro]

Shipping is only $3.00 for a coleman max CR-2 and heatsink. and that would include the rib removal from the host.

Pyro...

How much would shipping be for a coleman max cr2 heatsink? and it is $25 for the heatsink and rib reduction on it, am i correct?

 

[Sk8trboipyro]

hey, are you still making these? sorry if im just bringing up an old thread.

 

[Flaminpyro]

Dont be sorry ! it's not an old thread
Yes I'm taking orders for custom copper heatsinks for use with Aixiz modules or "direct Press" for either 3.7mm, 5.6mm or 9mm diodes.
Please contact me via PM, Thanks !
Pyro...

hey, are you still making these? sorry if im just bringing up an old thread.

 

[amkdeath]

How much would a block, base being 40mm x 20mm ; and 40mm high cost? I would need it to fit an aixis module with set screw on top of the assembly. I would also need small fins on the sides, but it is essential that the dimensions stay at 40x20x40, so the fins would just cut into the block itself, not protrude out. The bottom needs to be flat, and I don't need any holes drilled into it anymore.

I would need this mainly for testing diodes.

Thanks a ton in advance,

Amk

COMPLETE EDIT: Changed the idea as a whole.

 

[amkdeath]

Bump, and I completely changed my post above.