XD001
0
- Joined
- Feb 15, 2014
- Messages
- 107
- Points
- 18
Thanks for all the replies.
Last edited:
Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
How to Register on LPF | Buy Site Supporter Role (remove some ads) | LPF Donations
CLOSED: Thanks for the replies.
- Thread starter XD001
- Start date
- Joined
- Oct 3, 2011
- Messages
- 899
- Points
- 0
Re: WTB: Someone trusted to do this Laser Host!
You could easily do this yourself with a nice DPSS 532nm laser/driver combo from eBay. I just bought one from Techwood IIRC that's 80mW for $25 shipped. You could easily find one with the output you desire for less. The 12mm DPSS module should fit easily into the host and using a positive ground outlay it would only take one wire soldered from where the spring contacts the DPSS driver board connected to the contact for the battery, just make sure you put the battery in "-" towards the output of the laser.
You could easily do this yourself with a nice DPSS 532nm laser/driver combo from eBay. I just bought one from Techwood IIRC that's 80mW for $25 shipped. You could easily find one with the output you desire for less. The 12mm DPSS module should fit easily into the host and using a positive ground outlay it would only take one wire soldered from where the spring contacts the DPSS driver board connected to the contact for the battery, just make sure you put the battery in "-" towards the output of the laser.
IsaacT
0
- Joined
- Aug 25, 2010
- Messages
- 5,947
- Points
- 83
Re: WTB: Someone trusted to do this Laser Host!
Make sure and only use a single lithium ion and have some spacers in there. Otherwise the heat from the extra 8.4V will destroy your driver on the 532 module.
Make sure and only use a single lithium ion and have some spacers in there. Otherwise the heat from the extra 8.4V will destroy your driver on the 532 module.
busman2
0
- Joined
- Jan 22, 2014
- Messages
- 464
- Points
- 28
Re: WTB: Someone trusted to do this Laser Host!
Yes I am with these guys, you should really have a go yourself, very easy to do and people here will give you any help you need, save yourself a heap of money and get great satisfaction every time that Grenade "Glows up"
Yes I am with these guys, you should really have a go yourself, very easy to do and people here will give you any help you need, save yourself a heap of money and get great satisfaction every time that Grenade "Glows up"
- Joined
- Jul 4, 2012
- Messages
- 2,832
- Points
- 63
Re: WTB: Someone trusted to do this Laser Host!
Instead of a little green....why not put a monster blue in that host, and really do it justice?
you could get a diode and driver combo from DTR, just solder red to red, black to black, and boom.
Instead of a little green....why not put a monster blue in that host, and really do it justice?
you could get a diode and driver combo from DTR, just solder red to red, black to black, and boom.
- Joined
- Feb 18, 2013
- Messages
- 744
- Points
- 28
Re: WTB: Someone trusted to do this Laser Host!
This is the first thread on this.
As you can see, they were given plenty to build this. However, it seems they would rather pay $70 to have it built than ~$25 to get a soldering iron and solder two wires...
This is the first thread on this.
As you can see, they were given plenty to build this. However, it seems they would rather pay $70 to have it built than ~$25 to get a soldering iron and solder two wires...
RayJay
0
- Joined
- May 2, 2014
- Messages
- 344
- Points
- 0
Re: WTB: Someone trusted to do this Laser Host!
I just want to ask a question? How old are you XD001?
I just want to ask a question? How old are you XD001?
Tman
0
- Joined
- Feb 19, 2012
- Messages
- 213
- Points
- 18
Re: WTB: Someone trusted to do this Laser Host!
PM'd you re: purchase LMK soon OK!
PM'd you re: purchase LMK soon OK!