- Joined
- Jul 10, 2015
- Messages
- 9,890
- Points
- 113
I thought 26650 cells would fit a C-cell Maglite, but they are much too tight, it will need to be sanded with a long dowel wrapped in sandpaper, and my own springboard and switch setup, so I am going to use another 26650 specific housing. I may fix this one as well, but be aware I tried several brands of 26650 and they are all too tight.
18650's with sleeves will fit.
I would prefer to keep the insulative and smooth inner coating rather than sanding down to bare aluminum.
The C cells are 25mm wide and these 26650's are closer to 26.4 at the top.
I was just talking with someone about this host, it looks good too with the fins.
New Nktech NK 9T6 9x Bulb XM L XML T6 LED 11000LM Flashlight Torch Lamp Outdoor | eBay
18650's with sleeves will fit.
I would prefer to keep the insulative and smooth inner coating rather than sanding down to bare aluminum.
The C cells are 25mm wide and these 26650's are closer to 26.4 at the top.
I was just talking with someone about this host, it looks good too with the fins.
New Nktech NK 9T6 9x Bulb XM L XML T6 LED 11000LM Flashlight Torch Lamp Outdoor | eBay
Attachments
Last edited: